650695
21
Zoom out
Zoom in
Previous page
1/136
Next page
Configuring the Network
Basic Setup
Cisco SPA100Series Administration Guide 27
1
Static IP Settings Internet IP Address and Subnet Mask: Enter the IP
address and subnet mask that was assigned to your
account by your service provider. This address is seen by
external users on the Internet.
Default Gateway: Enter the Gateway IP Address that
was provided by your ISP.
If needed, you can adjust the MTU and Optional Settings, as
described below.
PPPoE Settings User Name and Password: Enter the user name and
password that you use to log into your ISP network
through a PPPoE connection.
Service Name: If provided by your ISP, enter the Service
Name.
Connect on Demand: You can configure the ATA to
disconnect your Internet connection after a specified
period of inactivity (Max Idle Time). If your Internet
connection has been terminated due to inactivity, this
feature enables the ATA to automatically re-establish
your connection as soon as you attempt to access the
Internet again. If you choose this option, also set the Max
Idle Time.
Keep Alive: This option keeps you connected to the
Internet indefinitely, even when your connection sits
idle. If you choose this option, also set the Redial Period,
which is the interval at which the ATA verified Internet
connectivity. The default period is 30 seconds.
If needed, you can adjust the MTU and Optional Settings, as
described below.
MTU The Maximum Transmission Unit (MTU) setting specifies the
largest protocol data unit (in bytes) permitted for network
transmission. Generally, a larger MTU means greater efficiency.
However, a larger packet may cause delays for other traffic and
is more likely to become corrupted. In most cases, you should
keep the default setting, Auto, to allow the ATA to choose the
appropriate MTU. To specify the MTU, select Manual, and then
enter the number of bytes.
Field Description
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco Cisco SPA112 VoIP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco Cisco SPA112 VoIP in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info