650695
20
Zoom out
Zoom in
Previous page
1/136
Next page
Configuring the Network
Basic Setup
Cisco SPA100Series Administration Guide 26
1
traversal is required, either on the ATA or another network device. Use this option if
your ATA connects to one network on the WAN port (10.0.0.0 for example) and to
another network on the LAN port (192.168.0.0 for example). This option is selected by
default and is suitable for most deployments.
Bridge: Bridged mode is used if the ATA is acting as a bridge device to another router.
Choose this option if your ATA bridges a network (10.0.0.0 for example) to its LAN
port (with connected devices also in the 10.0.0x range).
Internet Settings
Use the Network Setup > Basic Setup > Internet Settings page to set up your Internet
connection.
Enter the settings as described in the table. After making changes, click Submit to save your
settings, or click Cancel to redisplay the page with the saved settings.
Internet Connection Type
Field Description
Connection Type Specify the Internet addressing method that your ISP requires.
Default setting: Automatic Configuration - DHCP
Automatic Configuration - DHCP: Use this setting if
your ISP dynamically provides an IP address. No
additional settings are required on this page.
Static IP: Use this setting if your ISP assigned a static/
permanent IP address. Complete the fields that appear.
See more information below.
PPPoE (DSL service): Some DSL-based ISPs use PPPoE
(Point-to-Point Protocol over Ethernet) to establish
Internet connections. If you are connected to the Internet
through a DSL line, check with your ISP to see if they
use PPPoE. Complete the fields that appear. See more
information below.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco Cisco SPA112 VoIP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco Cisco SPA112 VoIP in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info