650695
25
Zoom out
Zoom in
Previous page
1/136
Next page
Configuring the Network
Basic Setup
Cisco SPA100Series Administration Guide 31
1
Option 66 Provides provisioning server address information to hosts that
request this option. Server information can be defined in one of
three ways:
None: The ATA uses its own TFTP server to source
provisioning files, so it returns its own local IP address
to the client.
Remote TFTP Server: The ATA was configured by using
this method, and received server information through
Option 66 on its WAN interface. In response to client
requests, it provides the remote TFTP server
information.
Manual TFTP Server: Allows the manual configuration
of a configuration server address. While this option is
typically used to provide either an IP address or a fully
qualified hostname, the ATA will also accept and offer a
full URL including protocol, path and filename to meet
to requirements of specific clients.
Default setting: None
TFTP Server If you chose Manual TFTP Server for Option 66, enter the IP
address, hostname, or URL of the TFTP server that is used to
configure the ATA.
Default setting: blank
Option 67 Provides a configuration/bootstrap filename to hosts that request
this option. This option is used in conjunction with option 66 to
allow a client to form an appropriate TFTP request for the file.
Default setting: blank
Option 159 Provides a configuration URL to clients that request this option.
An option 159 URL defines the protocol and path information
by using an IP address for clients that cannot use DNS. For
example:
https://10.1.1.1:888/configs/bootstrap.cfg
Default setting: blank
Field Description
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco Cisco SPA112 VoIP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco Cisco SPA112 VoIP in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info