650695
27
Zoom out
Zoom in
Previous page
1/136
Next page
Configuring the Network
Advanced Settings
Cisco SPA100Series Administration Guide 33
1
Time Zone
To use a time server to establish the time settings, select Time Zone. Then complete the fields
in this section.
Advanced Settings
Use the Network Setup > Advanced Settings pages to configure features including port flow
control, MAC address cloning, VPN passthrough, and VLAN.
Port Setting (SPA122 Only)
MAC Address Clone (SPA122 Only)
VPN Passthrough (SPA122 Only)
•VLAN
CDP & LLDP
Field Description
Time Zone Choose the time zone for the site where the ATA is in operation.
Default setting: (GMT-08:00) Pacific Time (USA & Canada)
Adjust Clock for
Daylight Saving
Changes
Check the box if you want to automatically adjust the time when
Daylight Savings Time is in effect. Otherwise, uncheck the box.
Default setting: Enabled
Time Server Address To use the ATAs default Network Time Protocol (NTP) server,
select Auto from the drop-down list. This is the default setting.
If you want to specify the NTP server, select Manual, and then
enter the NTP server address.
Default setting: Auto
Resync Timer Enter the Resync timer interval value (in seconds). This timer
controls how often the ATA resynchronizes with the NTP server.
Default setting: 3600 seconds
Auto Recovery After
Reboot
Choose this option to allow the ATA to automatically reconnect
to the time server after a system reboot.
Default setting: Disabled
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco Cisco SPA112 VoIP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco Cisco SPA112 VoIP in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info