650695

Cisco Cisco SPA112 VoIP Manual

28
Zoom out
Zoom in
Previous page
1/136
Next page
Configuring the Network
Advanced Settings
Cisco SPA100Series Administration Guide 34
1
Port Setting (SPA122 Only)
Use the Network Setup > Advanced Settings > Port Setting page to set the ETHERNET
(LAN) port attributes.
After making changes, click Submit to save your settings, or click Cancel to redisplay the page
with the saved settings.
MAC Address Clone (SPA122 Only)
A MAC address is a 12-digit code assigned to a unique piece of hardware for identification
purposes. Some ISPs require that you register a MAC address in order to access the Internet. If
you previously registered your account with another MAC address, it may be convenient to
assign that MAC address to your ATA. You can use the Network Setup > Advanced Settings
> MAC Address Clone page to assign a MAC address that you previously registered with your
Service Provider.
After making changes, click Submit to save your settings, or click Cancel to redisplay the page
with the saved settings.
Field Description
Flow Control Flow control is a mechanism that temporarily stops the
transmission of data on a port. For example, a situation might
arise where a sending station (computer) is transmitting data
faster than some other part of the network (including the
receiving station) can accept. The overwhelmed network
element will halt the transmission of the sender for a specified
period of time.
Choose Enabled to enable this feature, or choose Disabled to
disable this feature.
Default setting: Enabled
Speed Duplex Choose the duplex mode. You can select from Auto-negotiate,
10 Half, 10 Full, 100 Half and 100 Full. Cisco recommends
choosing Auto-negotiate to automatically select the appropriate
mode for the traffic. Use caution with other settings. Problems
can result if you choose a setting that is not appropriate for the
network devices.
Default setting: Auto-negotiate
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco Cisco SPA112 VoIP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco Cisco SPA112 VoIP in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info