588931
14
Zoom out
Zoom in
Previous page
1/38
Next page
14
SPD
Here the function “speed measurement“ can be switched on and off.
Select with MR-button,
Then the speed measurement can be switched on or off with the LR-/UR-button.
Upon switching on the speed measurement, the display for initializing appears after pressing the
MR-
button (for saving the setting).
When the speed transmitter has not been initialized yet, the initialization can now be started here. It is
important that the speed transmitter will be activated first: this can be done by short (careful) hitting the
marking on the transmitter with the circle magnet or (in case it has already been installed) by turning the
wheel a few times (so the magnet will pass the transmitter activating it).
By shortly pressing the
MR-button you confirm (please only after activating the transmitter).
The display now shows briefly a percentage number and will go back after successful initialization to the
options menu (display shows “Speed“ highlighted).
If the initialization is not successful, the percentage number goes to 100% and the
HAC5 will display
“Iniscan Error“.
Then activate the transmitter again and restart the initialization with “retry(select with LR-button and
confirm with
MR-button). With “cancel“ (select with LR-button and confirm with MR-button) the initiali-
zation function can be left (HAC5 shows the options menu again).
Cadence
Here the function “pedal frequency measurement“ can be switched on or off.
Select with
MR-button,
then the pedal frequency measurement can be switched on or off with the UR-/LR-button.
If the pedal frequency measurement is switched on, the display for initialization appears on the display
after pressing the
MR-button (for saving the setting).
When the pedal frequency transmitter has not been initialized yet, the initialization can be started now.
It is important that first the speed transmitter will be activated: this happens by short (careful) hitting the
marking on the transmitter with the circle magnet or (in case it has already been installed) by turning the
crank a few times (so the magnet will pass the transmitter activating it).
By shortly pressing the
MR-button you confirm (please only after activating the transmitter).
The display now shows briefly a percentage number and will go back to the options menu after suc-
cessful initialization (display shows “CAD“ highlighted).
If the initialization is not successful, the percentage number goes to 100% and the HAC5 will display
“Iniscan Error“.
Then activate the transmitter again and start the initialization again with “retry“ (select with
LR-button
and confirm with MR-button). With “cancel(select with LR-button and confirm with MR-button) the
initialization function can be left (
HAC5 shows again the options menu).
RDS
Here the speed measurement can be switched on or off using the accessory RDS II (Radar Distance
System – optionally available at your dealer).
Select with
MR-button,
the speed measurement can then be switched on or off with the UR-/LR-button.
If the speed measurement is switched on, the display for initialization appears on the display after pres
-
sing the MR-button (for saving the setting).
Before initializing the RDS II must be switched on to transmit a signal which the HAC5 can receive.
By pressing the MR-button shortly you confirm (please only after activating the transmitter).
The display now shows briefly a percentage number and will go back after successful initialization to the
options menu (display shows “RDS“ highlighted).
If the initialization is not successful, the percentage number goes to 100% and the HAC5 will display
“Iniscan Error“.
Then activate the transmitter again and restart the initialization with “retry(select with
LR-button and
confirm with
MR-button). With “cancel“ (select with LR-button and confirm with MR-button) the initiali-
zation function can be left (HAC5 shows again the options menu).
Heart
Here the function “heart rate measurement“ can be switched on or off.
Select with
MR-button,
then the heart rate measurement can be switched on or off with the UR-/LR-button.
Upon switching on the heart rate measurement, the display for initializing appears after pressing the
MR-button (for saving the setting).
SPD
12 %
Iniscan SPD
Bike1
retry
Iniscan Error
cancel
12 %
Iniscan CAD
Bike1
retry
Iniscan Error
cancel
Iniscan Error
Fehler bei der Initialisierung
Iniscan Error
Fehler bei der Initialisierung
Cadence
RDS
Iniscan Error
Fehler bei der Initialisierung
12 %
Iniscan RDS
RDS
retry
Iniscan Error
cancel
Heart
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ciclo HAC 5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ciclo HAC 5 in the language / languages: English as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ciclo HAC 5

Ciclo HAC 5 Additional guide - English - 4 pages

Ciclo HAC 5 Additional guide - German - 4 pages

Ciclo HAC 5 Quick start guide - German - 2 pages

Ciclo HAC 5 User Manual - German - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info