588931
15
Zoom out
Zoom in
Previous page
1/38
Next page
15
When the heart rate transmitter has not been initialized yet, the initialization can be started now. It is
important that first the speed transmitter will be activated: this happens by wearing the belt or by short
and simultaneous rubbing (preferably with the thumb) on the electrodes (corrugated rubber parts left
and right from the hard transmitting device on the chest belt).
By shortly pressing the
MR-button you confirm (please only after activating the transmitter).
The display now shows briefly a percentage number and will go back after successful initialization to the
options menu (display shows ”HEART“ highlighted).
If the initialization is not successful, the percentage number goes to 100% and the
HAC5 will display
“Iniscan Error“.
Then activate the transmitter again and start the initialization again with “retry“ (select with
LR-button
and confirm with MR-button). With “cancel(select with LR-button and confirm with MR-button) the
initialization function can be left (HAC5 shows again the options menu).
Ski SPD
Here the speed measurement during skiing and snowboarding can be switched on or off.
The speed will be measured accordingly to the current decline (height difference).
Select with
MR-button,
the measurement can then be switched on or off with the
UR-/LR-button.
By pressing the MR-button again the set value will be saved and the setting menu reappears.
Note: Upon switching on e.g. the ski speed measurement in one profile and RDS at the same time, the
ski speed measurement will be internally switched off (according to the height difference) and the speed
will be measured with RDS II.
Altimeter
Here the function “altimetry“ can be switched on or off.
Select with
MR-button,
the altimetry can then be switched on or off with the UR-/LR-button.
By pressing the MR-button again the set value will be saved and the setting menu reappears.
Beeper
The beep sounds and the acoustic heart rate alarm can here be switched on or off.
If the heart rate alarm has been switched on, the alarm symbol will appear to the left in the display.
Select with MR-button,
the function can then be switched on or off with the UR-/LR-button.
By pressing the MR-button again the set value will be saved and the setting menu reappears.
In the normal operation mode the heart rate alarm can be switched on or off anytime by pressing the
UL-button for 3 sec.
Ascent
Here the function “ascending/descending display“ can be switched on or off.
Select with MR-button,
then the function can be switched on or off with the UR-/LR-button.
By pressing the MR-button again the set value will be saved and the setting menu appears again.
Vario
Here the function “ascend/descend“ can be switched on or off.
Select with MR-button,
the function can then be switched on or off with the UR-/LR-button.
By pressing the MR-button again the set value will be saved and the setting menu reappears.
STW
Here the function “stop watch“ can be switched on or off.
Select with MR-button,
the function can then be switched on or off with the UR-/LR-button.
By pressing the MR-button again the set value will be saved and the setting menu reappears.
Countdown
Here the function “countdown“ can be switched on or off.
Select with MR-button,
the function can then be switched on or off with the UR-/LR-button.
By pressing the MR-button again the set value will be saved and the setting menu appears again.
Power
Here the function “power“ can be switched on or off.
Select with MR-button,
the function can then be switched on or off with the UR-/LR-button.
By pressing the MR-button again the set value will be saved and the setting menu reappears.
Ski SPD
Altimeter
12 %
Iniscan HR
Bike1
retry
Iniscan Error
cancel
Iniscan Error
Fehler bei der Initialisierung
Beeper
Ascent
Vario
STW
Countdown
Power
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ciclo HAC 5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ciclo HAC 5 in the language / languages: English as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ciclo HAC 5

Ciclo HAC 5 Additional guide - English - 4 pages

Ciclo HAC 5 Additional guide - German - 4 pages

Ciclo HAC 5 Quick start guide - German - 2 pages

Ciclo HAC 5 User Manual - German - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info