588931
12
Zoom out
Zoom in
Previous page
1/38
Next page
12
If the initialization is not successful, the percentage runs up to 100 % and the HAC5 shows “Iniscan
Error retry cancel“ afterwards.
Activate transmitter once again after this and start initialization once again by selecting “retry” (LR-
button,
confirm with
MR-button).
“cancel” (select with
LR-button)
Through “cancel“ (select with LR-button and confirm with MR-button), the Initialization function can be
left (HAC5 shows the selecting menu again).
Press LR-button once to select “CAD“
Confirm with MR-button
Display shows “CAD on/off“, “on“ is marked.
Confirm with MR-button
Display shows “Iniscan CAD yes/no“, “yes“ is marked.
Now activate the cadence transmitter (pick it up and gently knock the spoke magnet against the mark
of the transmitter a few times, this starts the transmitter and it gives a signal.
Caution: The display of the HAC5 remains unchanged during the activation).
Confirm with MR-button (please confirm only after the transmitter is activated).
Display will shortly show a percentage and returns back to selection mode after successful Initialization
(display shows “CAD“ marked). Should the Initialization be unsuccessful see further up.
Press LR-button once to select “HR“
Confirm with MR-button
Display shows “HR on/off“, “on“ is marked.
Confirm with
MR-button.
Display shows “Iniscan HR yes/no“, “yes“ is marked.
If you have already put on the breast strap, it should already be activated. If not, activate it “manually“:
take the strap into your hands and rub it right and left on the ribbed parts with your thumbs, the trans-
mitter turns on through the friction and gives a signal.
Caution: the display of the HAC5 remains unchanged during activation.
Confirm with MR-button.
Display now shortly shows a percentage and returns to the section menu after successful Initialization
(Display shows “HR“ marked). Should the Initialization be unsuccessful see further up.
Press
MR-button for three seconds to leave the settings mode.
Through the settings in the “Bike1“ profile, this profile is already automatically “selected“, meaning the
display now shows the normal function mode of the “Bike1“ profile.
Now you can install the transmitters, the HAC5 is ready for use in terms of Initialization.
You can of course enter all the other data like wheel circumference, weight, measurements etc. first, to
do so follow the structure of the above example and enter the data in the setting mode concerned.
Important: Altogether, two speed transmitters, two cadence transmitters, one RDS II and one heart
rate transmitter can be initialized.
That means if you have already initialized the heart rate transmitter for “Bike1“, you only have to turn
on this function in the other profiles (“on“), you don’t have to initialize again (select “no“ for “Iniscan HR“
and then confirm with the MR-button).
An already initialized speed- or cadence transmitter for “Bike1cannot be initialized for “Bike2“. Only if
another transmitter was initialized for “Bike1“ (or an Initialization was made without transmitter, which
then breaks off with “error“) can the original transmitter be initialized for “Bike2“.
!
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ciclo HAC 5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ciclo HAC 5 in the language / languages: English as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ciclo HAC 5

Ciclo HAC 5 Additional guide - English - 4 pages

Ciclo HAC 5 Additional guide - German - 4 pages

Ciclo HAC 5 Quick start guide - German - 2 pages

Ciclo HAC 5 User Manual - German - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info