588918
8
Zoom out
Zoom in
Previous page
1/16
Next page
To set the needed values for the
calculation press left button short:
Heart rate lower limit
Adjust with right and left button (save and continue with
left button)
Default setting – 100 bpm (beats per minute) or with
CICLO
IInnZone® calculated value.
Range: 20 – 240
A lower heart rate limit can be set here or (after
CICLO
IInnZone®-calculation) the calculated value is
shown.
When the actual heart rate is lower than this value, the
CM 628i gives an optical alarm (display shows blinking
heart rate with 'lo' = low).
Heart rate upper limit
Adjust with right and left button (save and continue with
left button)
Default setting – 160 bpm (beats per
minute) or with
CICLO
IInnZone®
calculated value.
Range: 20 – 240
An upper heart rate limit can be set here or (after
CICLO
IInnZone®-calculation) the calculated value is
shown.
When the actual heart rate is higher than this value, the
CM 628i gives an optical alarm (display shows blinking
heart rate with 'Hi' = High).
Maximum heart rate
Adjust with right and left button (save
and continue with left button)
Default setting – 190 bpm (beats per
minute) or with
CICLO
IInnZone®
calculated value.
Range: 30 – 240
Shows the maximum heart rate, calculated with
CICLO
IInnZone®.
Fitness level
Set with right button, save and
continue with left button.
Range 1-4, corresponding to the
following levels:
1 – poor fitness
2 – average fitness
3 – good fitness
4 – high fitness
48 49
Start the transmitter search in the CM 628 by
pressing both buttons for a short time.
A percentage value runs up in the
display during the initialisation.
In case of successful initialisation,
the CM 628i changes automatically
into the normal operating mode and the indication SPD/AV
appears in the display.
In case of unsuccessful initialisation,
the transmitter search can be
started again by repeated short
pressing of both buttons.
The initialisation is interrupted after
a fault by short pressing of the left button and the CM 628i
then likewise changes into the normal operating mode.
Pay attention during the initialisation that no second
cadence transmitter is located nearby (currently active).
4.6 Calculation of
CICLO
IInnZone® , setting of the
heart rate limits /fitness level /sex / weight / year of
birth and initialisation of the heart rate transmitter
Press the right button until the
following display appears:
By pressing the left button for 3 sec.,
this display now appears:
By pressing both buttons short simultaneously the
CICLO
IInnZone®-calculation is started (see Chap. 7
CICLO
IInnZone®).
N.B.: when the CM 628i is used for the first time, the
CICLO
IInnZone® function should not be started at
once, since in order to obtain an exact calculation it is
necessary to insert the personal data relative to sex, weight
and age (these values are also necessary for calculation of
the calorie consumption).
After setting these values, the
CICLO
IInnZone®-
calculation can be started (see page 51).
02 CM 628i engl 34-65 27.09.2005 8:40 Uhr Seite 16
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ciclo CM 628i Master at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ciclo CM 628i Master in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ciclo CM 628i Master

Ciclo CM 628i Master User Manual - German - 17 pages

Ciclo CM 628i Master User Manual - Danish - 17 pages

Ciclo CM 628i Master User Manual - French - 16 pages

Ciclo CM 628i Master User Manual - Italian - 16 pages

Ciclo CM 628i Master User Manual - Spanish - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info