588918
6
Zoom out
Zoom in
Previous page
1/16
Next page
44 45
4.2 Setting of the service interv
al
Press the right button until the
following display appears:
By pressing the left button for 3 sec,
this display now appears:
Setting of the service interval
Set with right button, save and continue with left button.
Default = 1000 (km or 625 miles) or the remaining value
up to the next service.
Range = 0 - 9999 km or 6249 miles
The service interval can be adjusted here, e.g. after how
many kilometers travelled should the brakes be checked or
similar. The service interval will count down until it reaches
zero. The service symbol will then appear in the
display.
Following this, a new service interval can be entered. The
service symbol is then deleted from the display.
4. 3 Initialization of the speed transmitter
Press the right button until the
following display appears:
By pressing the left button for 3
sec., this display now appears:
Initialization of the speed transmitter
The initialisation display appears.
If no speed transmitter is initialised (e.g. after a battery
change without power-saving mode, or if the CM 628i is to
be used on a second bike), start the initialisation now by
short pressing of both buttons (see below).
If a speed transmitter has already been initialised, change
into the operating mode through short pressing of the left
button.
Before the transmitter search, allow the magnet to pass in
front of the speed transmitter once (1 wheel rotation).
This will start the Transmitter and emit a signal for approx.
3 minutes.
Measurement of the wheel circumference (U)
(for more precise adjustment):
Make a marker on the front tire and on the floor (e.g. with
chalk). Move the bike straight ahead by exactly one tire
rotation (for a more precise measurement ensure tire
pressures are correct and be seated on the bike) and mark
the location on the floor. Now measure the distance exactly
between the two markers on the floor to give you the
wheel circumference (in mm)
Adjust total kilometers 1 and 2
Set with right button, save and
continue with left button.
Default = 0 km or last adjusted
value.
Setting range max. = 99999 km or
62499 miles.
The total amount of kilometers travelled up to now can be
adjusted here.
Cadence On/Off switching (ON/OFF)
Switch On and Off with right button
(continue with left button).
Here, the cadence can be switched
On and Off. The cadence should be
switched on only when a cadence
transmitter is also used (mounted),
since the CM 628i will normally
search for the relevant transmitter
indefinitely.
The default setting is 'oFF'.
Heart rate On/Off switching (ON/OFF)
Switch On and Off with right button
(continue with left button).
Here, the heart rate measuring can be
switched On and Off. The heart rate
measuring should be switched on only when a heart rate
transmitter is also used, since the CM 628i will normally
search for the relevant transmitter indefinitely.
The default setting is 'on'.
R
02 CM 628i engl 34-65 27.09.2005 8:40 Uhr Seite 12
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ciclo CM 628i Master at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ciclo CM 628i Master in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ciclo CM 628i Master

Ciclo CM 628i Master User Manual - German - 17 pages

Ciclo CM 628i Master User Manual - Danish - 17 pages

Ciclo CM 628i Master User Manual - French - 16 pages

Ciclo CM 628i Master User Manual - Italian - 16 pages

Ciclo CM 628i Master User Manual - Spanish - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info