588918
5
Zoom out
Zoom in
Previous page
1/16
Next page
42
Unit of measure kilometers or miles
The preferred unit of measure for
the display can be set here,
kilometers or miles.
Change with right button (save
setting and continue with left
button).
Adjust daily kilometers 1 and 2
Set with right button, save and
continue with left button.
Default = 0 km or last adjusted
value
Setting range min. = 0.00 km
Setting range max. = 999.99 km or
624.99 miles
The daily kilometers can be adjusted here, e.g. as a
starting point in case of tours according to a tour guide-
book, if the tour was not entered at "0" km.
Wheel circumference 1 and 2
Set with right button, save and
continue with left button.
Default = 2080 mm (Bike 1) and
2050 mm (Bike 2) or last adjusted
value
Setting range min. = 0 mm
Setting range max. = 9999 mm
Wheel circumference tire size (mm)
The wheel circumference can be taken from the following
table or measured by yourself.
Tire size Circumference Tire size Circumference
40-559 26 x 1,5 2026 mm 40-622 28 x 1,5 2224 mm
44-559 26 x 1,6 2051 mm 47-622 28 x 1,75 2268 mm
47-559 26 x 1,75 2070 mm 40-635 28 x 1 1/2 2265 mm
50-559 26 x 1,9 2026 mm 37-622 28 x 1 3/8 2205 mm
54-559 26 x 2,00 2089 mm 20-622 700 x 20C 2114 mm
57-559 26 x 2,125 2114 mm 23-622 700 x 23C 2133 mm
37-590 26 x 1 3/8 2105 mm 25-622 700 x 25C 2146 mm
32-620 27 x 1 1/4 2199 mm 28-622 700 x 28C 2149 mm
32-622 700 x 32C 2174 mm
Caution: Whilst not in use, or during transportation of the
CM 628i e.g. in the car, the CM 628i should not remain
on the handlebar bracket. Small movements will activate
the movement sensor and start the transmitter search,
which is a very demanding function on the battery, e.g.
during a car journey of several hours, the battery life is
greatly reduced if the CM 628i is still in position on the
handlebar bracket and the transmitter search is activated
indefinitely by the vibrations of the car during the journey.
4. BASIC SETTINGS
If the CM 628i is to be used with 2 bikes, some adjust-
ments must be carried out separately for each bike.
Ensure the respective Bike number is displayed before
adjustments are commenced.
The heart rate measuring is independent from the set bike,
so the values set for heart rate measuring are valid for bike
1 and bike 2.
For all adjustments, the following applies:
The flashing value can be changed with the right button, by
short pressing of the left button this value is stored and the
next value to be adjusted flashes or the next display
appears.
The current adjusting mode can be prematurely ended by
pressing the left button for 3 seconds.
All adjustments and displays always refer to the
corresponding bike (Display or ).
4.1 Adjusting the unit of measure,
the wheel
circumference, the daily/total kilometres, switching
on and off the cadence and switching on and off the
heart rate measuring
Select the required bike ( or ) through short simultane-
ous pressing of both buttons.
Then press the right button shortly
until the following display appears:
By pressing the left button for 3
sec., this display now appears:
43
02 CM 628i engl 34-65 27.09.2005 8:40 Uhr Seite 10
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ciclo CM 628i Master at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ciclo CM 628i Master in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ciclo CM 628i Master

Ciclo CM 628i Master User Manual - German - 17 pages

Ciclo CM 628i Master User Manual - Danish - 17 pages

Ciclo CM 628i Master User Manual - French - 16 pages

Ciclo CM 628i Master User Manual - Italian - 16 pages

Ciclo CM 628i Master User Manual - Spanish - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info