588918
9
Zoom out
Zoom in
Previous page
1/16
Next page
50 51
The initialisation is interrupted after
a fault by short pressing of the left
button and the CM 628i then
likewise changes into the normal
operating mode.
Pay attention during the initialisation that no second heart
rate transmitter is located nearby (currently active).
Calculation of the
CICLO
IInnZone®-Berechnung
(see also Chap. 7)
In order to correctly calculate ones
personal
CICLO
IInnZone®, it is
necessary to firstly introduce personal
information regarding sex, weight,
age and fitness level.
In order to calculate the
CICLO
IInnZone® position the
chest belt correctly, take up a rest position (remain seated
and relaxed) and start the
CICLO
IInnZone® calcula-
tion ('InZonE' will appear on the display. Press both buttons
short to start the calculation).
The CM 628i heart rate monitor will then start to time 5
minutes. During this time, stay seated, relaxed and calm,
as the CM 628i will measure the minimum heart rate
reached during this period (heart rate at rest) and will store
this value for the subsequent calculation. The lowest
measured heart rate during this 5 minutes is always
shown in the upper display.
After the 5 minutes the lower value of the calculated per-
sonal
CICLO
IInnZone® appears in the display.
With always short pressing of the left button the upper
value of the calculated personal
CICLO
IInnZone®
appears.
By pressing left button for three seconds the CM 628i
leaves the setting mode and display shows normal mode
(SPD/H).
By short pressing of left button the
CICLO
IInnZone®-
calculation can be ended premature.
The basic settings are now ready.
If the CM 628i is to be used for two bikes, the bike-
specific settings must be carried out again for the second
bike.
Here you set your personal fitness level, necessary for the
CICLO
IInnZone®-calculation.
Sex
Set with right button, save and
continue with left button.
Change between
m = male and f = female.
The sex is needed for the
CICLO
IInnZone®-calculation and the calorie
consumption.
Weight
Adjust with right and left button (save
and continue with left button)
Range 20 – 299 kg
The actual weight is needed for the
CICLO
IInnZone®-calculation and
the calorie consumption.
Year of birth:
Adjust with right and left button (save
and continue with left button)
Range 1920 – 1999
The year of birth is necessary for the
CICLO
IInnZone®-calculation.
Initialization of the heart rate transmitter
The initialisation display for the heart
rate appears in the display.
If no heart rate transmitter has been
initialised, start the initialisation now
(see below).
If a heart rate transmitter has already been initialised,
change into the operating mode through short pressing of
the left button.
Before the transmitter search, put on the transmitter belt
(see Chap. 2.4). Contact with skin will start the transmitter.
Start the transmitter search in the CM 628i by pressing
both buttons for a short time.
A percentage value runs up in the
display during the initialisation.
In case of successful initialisation, the
CM 628i changes automatically into
the normal operating mode and the
indication SPD/H appears in the display.
In case of unsuccessful initialisation, the transmitter search
can be started again by repeated short pressing of both
buttons.
02 CM 628i engl 34-65 27.09.2005 8:40 Uhr Seite 18
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ciclo CM 628i Master at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ciclo CM 628i Master in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ciclo CM 628i Master

Ciclo CM 628i Master User Manual - German - 17 pages

Ciclo CM 628i Master User Manual - Danish - 17 pages

Ciclo CM 628i Master User Manual - French - 16 pages

Ciclo CM 628i Master User Manual - Italian - 16 pages

Ciclo CM 628i Master User Manual - Spanish - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info