588918
10
Zoom out
Zoom in
Previous page
1/16
Next page
53
5. FUNCTIONS
The individual primary functions can be called up by short
pressing of the right or left button, one after each other.
Through pressing the right button for 3 sec., the first sub-
function is called up in each case and, through subsequent
short pressing of the right button, further sub-functions
appear.
In travel operating mode, the instantaneous speed is
displayed simultaneously with all functions above in the
display.
All functions (except for stopwatch and time) have an
automatic start/stop in the travel operating mode (if the
CM 628i is located on the handlebar bracket), i.e. the
measurement starts shortly after the first wheel (or pedal)
rotational motion and ends a few seconds after the last
wheel (or pedal) rotational motion.
The sub-functions of the heart rate (average/maxi-
mum heart rate, calorie consumption, fat burn in %
and times within/without the set limits) are only
calculated when the stopwatch is running.
The daily values for the respective bike are reset to zero
through simultaneous pressing of both buttons for 3 sec.
(best done directly before beginning a new tour). The
indication 'Reset' will appear in the display for a short
period.
This reset does not work in the stopwatch function. There
only the stopwatch (and with this the sub functions of the
heart rate) are reset by pressing both buttons for 3 sec.
The total values can be deleted through a total reset (press
AC button on the reverse side for 3 sec. – all adjustments
and the transmitter initialisations are then also deleted) or
through battery removal for a longer period.
The individual functions and their meanings are
explained in the text below.
(To better distinguish the primary functions from the sub-
functions, the primary functions are printed in bold text
while sub-functions in bold, italic text.)
52
Current speed (SPD)
Indicates the current speed in km/h (or mph = miles per
hour) and is always displayed with all primary functions in
the upper display. In this case, the arrows (to the left in the
display) indicate whether the travel speed is faster () or
slower () than the instantaneous average speed. If both
arrows are displayed, the travel speed is in the range of the
instantaneous average speed.
Range: 0 - 999 km/h or 624 mph (depending on the
adjusted wheel circumference).
The display shows the speed up to 200 km/h or mph with
a decimal place, above that without a decimal place (in this
case, the third location is then displayed to the right above,
where the decimal place is normally located).
If " –– " is indicated in the display,
this means that no active speed
transmitter has been found. The
automatic transmitter search is
started through the insertion of the
CM 628 into the handlebar bracket
and then a zero flashes in the upper
display.
The display again returns to " – ",
this means that no transmitter has
been found. Then rotate the wheel once slowly (in order to
switch on the transmitter) and start the transmitter search
again by small movement of the bike or manually by
pressing both buttons short.
Daily kilometers (DST)
Indication of the kilometers travelled
up to now.
Range: 0 - 999.99 km or 624.99
miles
Sub-functions:
1. Actual daily kilometers
Sub-function of the function daily
kilometers.
If the daily kilometers were changed
in the basic setting, the daily
kilometers actually travelled are
displayed here. The symbol of the
respective bike appears in the
display in this case.
If the daily kilometers were not
changed, the sum of the daily
kilometers of Bike 1 and Bike 2 is displayed ( and in
02 CM 628i engl 34-65 27.09.2005 8:40 Uhr Seite 20
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ciclo CM 628i Master at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ciclo CM 628i Master in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ciclo CM 628i Master

Ciclo CM 628i Master User Manual - German - 17 pages

Ciclo CM 628i Master User Manual - Danish - 17 pages

Ciclo CM 628i Master User Manual - French - 16 pages

Ciclo CM 628i Master User Manual - Italian - 16 pages

Ciclo CM 628i Master User Manual - Spanish - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info