644104

Christopeit CX3 - 1531 Manual

19
Zoom out
Zoom in
Previous page
1/56
Next page
19
English
Step 7:
Attach the computer (9) at support (2).
1. Take the computer (9) that has been supplied out of the
packaging and insert the batteries (Type “AA”-1.5 V pencells) by
watching for the right polarity on the back of the computer (9).
(Batteries for the computer are not included in this item. Please
buy them at your located market.)
2. Place the computer (9) to support (2) and put the plug of
connection cable (18) into the socket from monitor (9) backside
and insert the plugs of pulse (50) too. Push the computer (9) to
top monitor bracket of front post (2) and secure with screws
M4x12 (55) and washer 4//10 (66).
(Attention: Ensure that the cable looms are not crunched or
pinched during installation. The screws for computer you find
on backside of computer)
Step 6:
Attach the pulse grip (8) and handgrips (7).
1. Put the handgrip bars (7L+7R) onto the connecting tubes (6L+6R)
and adjust the holes in the tubes so that they are aligned. (Note:
the handgrip bars must be aligned after assembly so that the
upper ends are inclined outwards (away from the support (2)).
2. Push the bolt M8x16 (16) through the holes and tighten the
handgrip bars (7) at connection tubes (6) with washers 8/19 (44),
and spring washers M8 (52) firmly.
3. Guide the pulse grip (8) through the appropriate holder of support
(2) and adjust the holder so that the holes and threats align. Put
on each screw M8x30 (51) one spring washer M8 (82) and one
washer 8/16 (31) and tighten the pulse grip (8) at the support (2)
firmly.
4. Put the pulse cable (50) through the holes at support (9) into top
position and attach the grip cover (53) onto pulse grip connection
point.
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Christopeit CX3 - 1531 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit CX3 - 1531 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info