793032
21
Zoom out
Zoom in
Previous page
1/60
Next page
21
Step 4:
Installation of the handgrips (13+19) at connecting tubes (34) and
support (8).
1. Push the axle (11) into the middle position at handlebar support (8) and
put on left hand side one wave washer 17//25 (10) and the hand grip
left (13) onto the axles’ end (11). (Note: Right and left are specified as
viewed standing on the machine during training. The handgrip bars
must be positioned after assembly, so that the upper ends are curved
outwards (away from the support (8)). For assembly adjust the handgrips
downwards). Put on the screw M8x16 (15) a washer 8//22 (14) and tighten
it firmly.
2. Install the right handgrip (19) incl. all additionally required parts on the
right hand side of the machine as described in 1. To tighten the screws
(15) firmly use both tools (114) at the same time.
3. Push the connecting tubes (34) into the handgrips (13+19) and adjust
the holes in the tubes so that they are aligned. Put onto the bolts M8x16
(32) one spring washer (27) and curved washer 8//19 (33) and tighten
the handgrip bars (13+19) at connection tubes (34) firmly.
4. Put the pulse cables (25) at pulse connection (30) at front side of support
(8).
English
Step 5:
Installation of the footrests (104) at footrest holder (100+103).
1. Put the footrest (104) onto the left footrest holder (103). Adjust the
holes in the parts so that they are aligned. (Note: The high edges of the
footrests (104) must point inwards (towards the main frame. The position
adjusted in this way should always be equal at both sides. The positions
can change as desired at all times by removing the carriage bolts (106)
and sliding the footrests on the footrest brackets to get a more or less
flat movement.)
2. Push the carriage bolts M6x50 (106) from above with washer for pedal
(105) through the holes. The hole of washer for pedal (105) need position
more close to main frame. Put on a washer 6//13 (108) and a spring
washer for M6 (109) from the opposite side and tighten firmly with
handgrip nut (107).
3. Install the footrest (104) on right hand side on footrest holder (100) as
described in 1. – 2.
4. Install the connecting tube cover left and right (110+112) at intended
position in front of footrest holder left and right (100+103) and secure
with screws M5x12 (5).
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Christopeit CX 7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit CX 7 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2.97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info