Manual Charnwood LA20i (page 6 of 16) (English)

815487

Zoom out

Zoom in

1/16

Keep the firebox well filled (the fuel may be sloped up from

the front firebars), but do not allow fuel to spill over the top of

the front fire bars. Take care that fuel does not project over

the front fire bars or damage to the glass may be caused when

the doors are closed.

Empty the ashpan, if necessary, and then riddle the fire. If the

fire is very low then it may be necessary to add a little fuel and

turn the thermostat control up for a brief period until the fire

is burning well before filling with fuel.

Some experimentation may be necessary to find the

thermostat setting most suitable for the particular fuel used

and the draw on the chimney, but generally the thermostat

should be turned down to the minimum setting overnight.

For overnight burning the fire doors must be closed.

To revive the fire, empty the ashpan if necessary, riddle, and

turn the thermostat control knob to maximum. When the fire

is burning well load on more fuel as necessary and turn the

thermostat to the desired setting.

REFUELLING

OVERNIGHT BURNING

THROAT PLATE AND

FLUEWAY CLEANING

MAINTENANCE

It is important that the throat plate and all the appliance

flueways are kept clean. When burning smokeless fuels they

should be cleaned monthly. When burning other fuels they

should be cleaned at least once a week, and more frequently

if necessary.

The throat plate and flueways may be cleaned with a low fire

still burning. Use the scraper tool to scrape any sooty

deposits to the front of the plate until they fall off into the

fire.

More soot will be deposited on the throat plate and in the

flueways if the appliance is run at low levels for long periods.

If this is the case then more frequent cleaning will be

necessary.

The appliance is finished in vitreous enamel. To clean the

surfaces simply wipe over with a dry cloth. Abrasive pads and

scouring cleaners must not be used as these will damage the

finish. Care should be taken not to knock the enamel with

hard objects as it will chip.

The glass in the doors is a special ceramic glass which is able

to withstand high temperatures. Before cleaning the glass

open the doors and allow them to cool. Clean the glass using

a damp cloth and then wiping over with a dry cloth. Any

stubborn deposits may be removed with a proprietary stove

glass cleaner or ceramic hob cleaner. Some deposits on the

glass may be burnt off simply by running the fire at a fast rate

for a few minutes. Do not use abrasive cleaners or pads as

these can scratch the surface which will weaken the glass and

cause premature failure. Aerosol spray cleaners should not be

used near the appliance whilst it is under fire.

If the fire is going to be out of use for a long period (for

instance in the summer) then to prevent condensation, and

hence corrosion, the thermostat should be left at the

maximum setting and the main doors left ajar. It is also

advisable to sweep the chimney and clean out the fire.

Spraying the inside of the doors and firebox with a light oil,

Cleaning

Cleaning the Glass

When not in use

OPERATING INSTRUCTIONS

Fig. 3. Grate Operation

C W

Riddle Between

Horizontal &

45° Positions

After Riddling

Move Tool

To Horizontal

Position

Do Not Go Beyond

45° Position

When Riddling

charnwood

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Charnwood LA20i in the language / languages: English as an attachment in your email.

The manual is 0.43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Charnwood LA20i Manual

Product: