796996

Cat Q10 Manual

14
Zoom out
Zoom in
Previous page
1/23
Next page
USER MANUAL
2
PLEASE
READ
BEFORE
FIRST
USE
SAFETY
PRECAUTIONS
Please read this manual and the recommended safety precautions to ensure the correct use of this device.
If used in saltwater, rinse the device afterwards to avoid salt corrosion.
Avoid hitting, throwing, crushing, puncturing or bending the device.
Do not switch on the device in a circumstance when it is prohibited or where it may cause interference or danger.
When driving please ensure you adhere to local laws regarding the use of phones.
Always follow any device use rules in hospitals and health care facilities.
Please consult your doctor and the device manufacturer to determine if operation of your device may interfere with the operation of your medical
device.
When travelling by air follow the guidance of airline personnel regarding the use of mobile phones on aircraft.
Do not switch on the device in a circumstance where the use of mobile phones is prohibited, or in a situation where the device may cause
interference or danger.
Please be aware that disassembling your device may impact the device warranty.
Take caution and follow guidelines when using the device in environments with flammable gas, such as a gas station.
Keep the device and its accessories away from young children. Do not allow children to use the device without guidance.
It is recommended to use a Cat Phones approved chargers to charge your device.
Observe any laws or regulations on the use of wireless devices. Respect others’ privacy and legal rights when using the wireless device.
Turn off your device when in areas signed to turn off ‘two-way radios’ or ‘electronic devices’ to avoid interfering with other equipment.
Complete safety instructions can be found at https://www.catphones.com/support/
3
LEGAL NOTICE
© 2022 Caterpillar. All Rights Reserved.
CAT, CATERPILLAR, LET’S DO THE WORK, their respective logos, "Caterpillar Yellow", the "Power Edge" and Cat “Modern Hex” trade dress as well
as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
Bullitt Mobile Ltd. is a licensee of Caterpillar Inc.
Bullitt Mobile Ltd.’s and third-party trademarks are the property of their respective owners.
No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Caterpillar Inc.
The product described in this manual may include copyrighted software and possible licensors. Customers shall not in any manner reproduce,
distribute, modify, decompile, disassemble, decrypt, extract, reverse engineer, lease, assign, or sublicence the said software or hardware, unless
such restrictions are prohibited by applicable laws, or such actions are approved by respective copyright holders under licenses.
The contents of this manual are provided “as is”. Except as required by applicable laws, no warranties of any kind, either express or implied,
including but not limited to the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy,
reliability or contents of this manual.
To the maximum extent permitted by applicable law, in no case shall the manufacturer be liable for any special, incidental, indirect, or
consequential damages, or lost profits, business, revenue, data, goodwill or anticipated savings.
Wi-Fi® is a registered trademark of Wi-Fi Alliance
®
.
All other third-party trademarks and trade names, including the Bullitt trademark, are those of their respective owners.
4
NOTICE
Some features of the product and its accessories described herein rely on the software installed, capacities and settings of local network, and may
not be activated or may be limited by local network operators or network service providers. Therefore, the descriptions in this manual may not
exactly match the purchased product or its accessories.
The manufacturer reserves the right to change or modify any information or specifications contained in this manual without prior notice or
obligation.
The manufacturer is not responsible for the legitimacy and quality of any products that you upload or download through this device including text,
pictures, music, movies, and non-built-in software with copyright protection. Any consequences arising from the installation or usage of the
preceding products on this device is accountable to you.
IMPORT
AND
EXPORT
REGULATIONS
Customers shall comply with all applicable export or import laws and regulations. Customers must obtain all necessary governmental permits and
licenses to export, re-export or import the product mentioned in this manual including the software and technical data.
5
CONTENTS
WELCOME
TO
THE
CAT®
Q10
.............................................................................................................................................................................................. 7
RUGGED
CREDENTIALS
..................................................................................................................................................................................................... 7
WHAT’S
IN
THE
BOX
.......................................................................................................................................................................................................... 7
GETTING
STARTED
........................................................................................................................................................................................................... 8
DEVICE DESCRIPTION ........................................................................................................................................................................................................................................................................................... 8
INSTALLING
SIM
CARD
................................................................................................................................................................................................. 9
INSTALLING
BATTERY
.................................................................................................................................................................................................. 9
CHARGING DEVICE
................................................................................................................................................................................................... 10
POWERING YOUR DEVICE ON/OFF
.............................................................................................................................................................................. 10
LED DEFINITIONS
....................................................................................................................................................................................................... 11
CONNECTING TO YOUR CAT Q10 ............................................................................................................................................................................. 12
CONNECT TO CAT Q10 ......................................................................................................................................................................................... 12
LOGIN TO MyQ10 PORTAL
.................................................................................................................................................................................. 12
CHANGE SSID AND WIFI PASSWORD
............................................................................................................................................................... 12
CHANGE ADMIN PASSWORD
............................................................................................................................................................................. 12
MyQ10 PORTAL .......................................................................................................................................................................................................... 13
HOME PAGE
.......................................................................................................................................................................................................... 13
WIFI
....................................................................................................................................................................................................................... 13
INTERNET ............................................................................................................................................................................................................... 13
SYSTEM
................................................................................................................................................................................................................. 13
CONNECTED DEVICES
......................................................................................................................................................................................... 13
QR CODE
............................................................................................................................................................................................................... 14
BATTERY
............................................................................................................................................................................................................... 14
OTHER
................................................................................................................................................................................................................... 14
MESSAGES
............................................................................................................................................................................................................ 14
EVENTS
.................................................................................................................................................................................................................. 14
HELP
...................................................................................................................................................................................................................... 14
FAQs ............................................................................................................................................................................................................................. 15
HOW DO I UPDATE THE CAT Q10 FIRMWARE?
............................................................................................................................................... 15
HOW DO I CHECK FOR A SOFTWARE UPDATE MANUALLY? .......................................................................................................................... 15
HOW DO I KNOW WHEN MY CAT Q10 IS PERFORMING A FIRMWARE UPDATE? ........................................................................................ 15
WHAT HAPPENS IF I FORGET MY WIFI PASSWORD?...................................................................................................................................... 15
WHAT HAPPENS IF I FORGET ADMIN PASSWORD? ........................................................................................................................................ 15
6
WHY IS THE WIFI LED ON MY DEVICE NOT ON? ............................................................................................................................................. 15
WHY IS THE NETWORK LED ON MY DEVICE BLINKING RED? ....................................................................................................................... 15
CAN I TETHER THE DEVICE TO MY PC?
....................................................................................................................................................................... 15
WHY IS THE WIFI LED ON MY DEVICE NOT ON? ............................................................................................................................................. 15
WHY IS THE NETWORK LED ON MY DEVICE BLINKING RED? ....................................................................................................................... 15
WHY DOES MY CAT Q10 NOT CONNECT TO THE INTERNET?
.......................................................................................................................................... 16
APPENDIX
......................................................................................................................................................................................................................17
SAFETY INSTRUCTIONS
............................................................................................................................................................................................... 20
CAT
Q10
SPECIFICATION .......................................................................................................................................................................................... 22
7
WELCOME TO THE CAT® Q10
The Cat Q10 is an advanced professional tool, a portable rugged hotspot with muscles. One solid spec, but many professional use cases.
Engineered with a superior level of rugged protection in a highly portable design. If you work hard and play hard, the Cat Q10 is tough enough to
survive the drops, bumps and dings of the day to day while still providing the reliability that our customers expect from Caterpillar’s category-
leading rugged credentials.
RUGGED CREDENTIALS
DROPPING
YOUR
DEVICE:
•
Do: Use your device up to a height of 1.8 meters – it’s drop proof within this height range.
•
Don’t: Throw it with force or drop from above the 1.8 meters; it’s durable, but not indestructible.
WATERPROOFING:
•
Do: Use your device in damp and wet conditions. Ensure all components and covers are properly closed
before using in such environments.
DUSTPROOF:
•
Do: Use your device in dirty, dusty environments. The Cat
®
Q10 is certified IP68, an industry standard
measure for durability.
EXTREME
TEMPERATURES:
•
Do: Use your device within the operational temperature range of -10°C (14°F) to 55°C (131°F). It can also handle extreme changes in
temperature: shifting between cold and hot, or vice versa very quickly.
•
Don’t: Use it outside the range of 0°C to 45°C without the use of protective gloves.
WHAT’S IN THE BOX
•
Device
•
Quick start guide
•
USB C power cable
GETTING
STARTED
DEVICE DESCRIPTION
1.
Power button
2.
SIM Door
3.
USB cover
4.
Network signal LED
5.
WI-FI LED
6.
Battery LED
8
9
INSTALLING
SIM
CARD
1.
Use your fingertip to open the SIM door.
2.
Insert the SIM card to the SIM slot with the gold pins of the SIM card facing towards the power button on the front of the device.
3.
Push the SIM inwards until you hear a click, and it locates.
4.
Push the SIM door back into position until it is securely closed.
INSTALLING
BATTERY
-
Remove the back cover from the device.
-
Place device upside down onto a flat surface.
-
Locate the metal contacts on the battery to the pins on the housing.
-
Push Battery down into device until it fits into position.
-
To replace the back cover, ensure that the locator stub on the back cover is correctly positioned so that it inserts to the reset hole located on
the back of the device next to the battery. Once located push the cover firmly back onto the device. Please note failure to do this will
compromise the seal on the device and the Cat Q10 waterproofness.
10
CHARGING DEVICE
7.
Use your fingertip to open the USB port cover.
8.
Insert USB cable.
9.
Once charging is complete remove USB cable and ensure that door is securely closed.
When battery power is exhausted, your device will power off automatically. The time required to charge the battery depends on its
age and
the environmental temperature.
If the battery is completely exhausted, your device may not power on immediately after charging starts. Allow the battery to charge for a few
minutes before attempting to turn it on.
NOTE:
Your device may also power off during usage if it is consuming more power than it is being supplied by the charger. To avoid this, we
recommend the use of a Quick Charge 2 or higher compatible charger.
POWERING YOUR DEVICE ON/OFF
POWER
ON
Press
and
hold
the
Power
Key
for 3 seconds until all three LEDs flash green.
•
Whilst the device is booting, the battery LED will continue to blink.
•
The Signal and Wi-Fi LED will remain off until ready.
•
Once all 3 LEDs are lit, the device has powered on. This should take about 1 minute unless the device has a firmware update to perform
•
If the Network and Wi-Fi icons are blinking red, you may have an issue. (Please see FAQs).
POWER
OFF
•
Press
and
hold
the
Power
Key
for 3 seconds until all three LEDs flash amber.
•
Whilst the device is shutting down, the battery LED will continue to blink.
•
When all LEDs are off. The device is powered off.
11
LED DEFINITIONS
BATTERY INDICATOR LED
LED BEHAVIOUR
BATTERY STATUS
Solid Green
60% +
Solid Amber
21% - 59%
Solid Red
1% - 20%
Flashing Green
60% + and charging
Flashing Amber
21% - 59% and charging
Flashing Red
1% - 20% and charging
No LED
Device powered off, not charging
NOTE:
It is possible to operate the Cat Q10 without a battery inserted. Should you operate the device in this mode, you will see the following
Battery indicators:
LED BEHAVIOUR
DEVICE STATUS
Flashing Green
Device operating normally
Flashing Red
Charger unsuitable for this mode of operation. Device will not power on.
Wi-Fi INDICATOR LED
LED BEHAVIOUR
DEVICE STATUS
SOLID GREEN
Wi-Fi enabled
NO LIGHT
Wi-Fi off (Power save mode)
BLINKING RED
Wi-Fi Error
NETWORK SIGNAL INDICATOR LED
LED BEHAVIOUR
SOLID GREEN
BLINKING RED
12
CONNECTING TO YOUR CAT Q10
CONNECT TO CAT Q10
1.
Ensure that your Cat Q10 is powered on, and LEDs indicate network coverage is available.
2.
Search for Wi-Fi networks from the device you wish to attach.
3.
You should see the Cat Q10 Network name (SSID) in the format ‘
Cat Q10 – XXXX
’
4.
Enter the Default password for this connection and connect to Network.
NOTE:
Both the Default SSID and PASSWORD are supplied in the box but can also be found inside the back cover of you Cat Q10.
Alternatively, If the device you are connecting from can scan QR codes you will find a QR code inside the box titled ‘CONNECT TO NETWORK’
which will connect you to the default SSID using the default password.
You should now be connected to the internet via your Cat Q10. You don’t need do anything else other than use your device. However, we
recommend that you login to your MyQ10 portal to change both the user and admin passwords.
LOGIN TO MyQ10 PORTAL
Now that you are connected to your Cat Q10 you can login to the MyQ10 portal to configure your device. Please note this is entirely optional.
-
Launch any browser on your device connected to your Cat Q10.
-
Navigate to http://192.168.1.1
-
Read and agree to the Privacy Policy and Software update terms.
-
Login to the device with the default admin password ‘admin’ when prompted
CHANGE SSID and Wi-Fi PASSWORD
-
Navigate to ‘Wi-Fi’. (Note on some devices you may need to open the settings menu to see this).
-
Change SSID and/or password.
-
Save changes.
-
Device will take a minute to reset, at which point you will have to re-connect to the new SSID using the new password if changed.
NOTE:
The SSID and password supplied in the box and inside the back cover are no longer valid if changed. However, if you factory reset your
device the SSID and password will be returned to default.
CHANGE ADMIN PASSWORD
-
Navigate to ‘System > Change login password’
-
Enter the current admin password, then reconfirm the new admin password twice.
-
Save changes.
-
You will be automatically logged out of the Homepage, if you wish to login again you will need to use your new admin password.
-
If you lose your admin password and need to factory reset your Cat Q10, you can do so by pressing the reset button on the back of the device.
13
MyQ10 PORTAL
Now that your CAT Q10 is up and running, you can look to use some of the more advanced settings of your device should you wish. This section
focuses on highlighting some (but not all) of the key features available to you. Unless you are an advanced user or have a strong requirement to
change these settings, we would recommend that default settings are maintained where possible.
HOME PAGE
-
This is simply a dashboard that details the status of your device.
o
Your connection status (Connected/Not connected).
o
Your 5G signal strength (if available).
o
Your 4G LTE signal strength (if available).
o
Your total data uploaded and downloaded.
o
Number of devices connected to the Cat Q10.
o
Battery status.
Wi-Fi
-
As previously detailed this screen can be used to change SSID and username. You can also configure more advanced settings such as
showing 2.4GHz and 5GHz SSID separately, configuring Wi-Fi channels, hiding SSID and customizing bandwidth and security settings.
INTERNET
-
Select your preferred internet connection type. (We recommend ‘Auto’ mode)
-
Modify your Access Point Name (APN)
-
Control your SIM PIN to make your device more secure.
NOTE:
If you have a SIM PIN activate on your SIM card, you will have to log into the MyQ10 portal every time you power it on
and enter the SIM pin. You should be prompted for this automatically after logging into the MyQ10 portal. If you have
not entered your SIM PIN the device will not connect to the network and the Network signal LED will blink red.
-
Enable Airplane mode (Disable network connectivity)
-
Enable Data Roaming
NOTE:
If you do not have this feature enabled, your Q10 will not connect to the internet outside of your home network. The
device will not connect to the network and the Network signal LED will blink red. If you enable this feature, roaming
charges may apply.
SYSTEM
-
View system information, e.g., IMEI, MAC and IP addresses.
-
Check and perform Firmware updates
-
Change Admin password
-
Adjust time settings
-
Perform MAC filtering
-
Change LAN settings
-
Factory Reset Device (Restore ALL settings to factory default)
-
Restart Device.
14
CONNECTED DEVICES
-
Simply displays all devices currently connected to your Cat Q10.
QR CODE
-
Provides QR codes for other users to connect to your device. Please note, unlike the sticker inside your box, this QR code is dynamic and
updates as you change your SSID and password.
BATTERY
-
This menu gives you the option to enable ‘Always on’ charge mode.
o
We recommend you enable this feature if you plan to continuously keep your device connected to a power source. This mode limits
the battery capacity to 60% and helps prevent battery damage. This mode will not degrade device performance.
OTHER
-
Enable/Disable USB tethering. (Default on).
o
This allows you to use your Cat Q10 via USB instead of via Wi-Fi.
-
Set and monitor data usage.
o
Enable the feature and set a maximum data usage limit, and a reminder.
▪
When you reach your data limit, the device will prevent further data transmission for the defined interval, unless reset.
MESSAGES
-
Your Cat Q10 is capable of receiving SMS notifications.
o
You can also send basic SMS messages by clicking the ‘+’ symbol on this page.
EVENTS
-
This section contains system information related to events such power on/off, overheating notifications and FOTA status.
HELP
-
Weblinks to Support, Privacy Policy and Regulatory information.
15
FAQs
HOW DO I UPDATE THE CAT Q10 FIRMWARE?
The default setting is for automatic firmware updates. We strongly recommend that you keep this option enabled to remain up to date with the latest
software and security updates. Should you wish to disable this feature at any time you can do so by logging into the MyQ10 portal and navigating to
the Firmware page and deselecting the ‘Auto update’ option:
Settings > System > Firmware version > Auto update
HOW DO I CHECK FOR A SOFTWARE UPDATE MANUALLY?
If you have disabled auto firmware updates and want to check to see if there is a new firmware for your device. You can navigate to the Firmware page
and compare the ‘Current version’ against ‘Latest version’. If there is an update for your device, you will be able to click the ‘FOTA UPGRADE’ button at
the bottom of the page. If this button is greyed out, then there is no update available for your device.
HOW DO I KNOW WHEN MY CAT Q10 IS PERFORMING A FIRMWARE UPDATE?
The LEDs will flash green in sequence one after another until the update is complete. Please do not power off your device off during this activity. The
device will perform an update at power on if one is available. Again this is shown by green running lights.
WHAT HAPPENS IF I FORGET MY Wi-Fi PASSWORD?
You can log in to the MyQ10 portal and change your Wi-Fi password from the Wi-Fi page.
WHAT HAPPENS IF I FORGET MY ADMIN PASSWORD?
If you have changed and forgotten your admin password, you can factory reset your device which will return to the device to factory settings. All user
information will be lost, and you will need to connect to the device using the original Wi-Fi password. This will also return the admin password to
‘admin’.
To factory reset your device, ensure the device is powered on. Remove the back cover, then press the ‘reset’ button on the back of the device. The
LEDs on the device will blink green in order three times, then shortly after the device will enter its normal boot sequence.
CAN I TETHER THE DEVICE TO MY PC?
Yes, you can. If you connect your device to a PC or laptop and it is powered on, it should create and internet connection via your USB connection. You
can also access the MyQ10 portal through this connection.
WHY IS THE Wi-Fi LED ON MY DEVICE NOT ON?
This is because 'Power saving’ mode has been enabled on the device. Wi-Fi is turned off to save power when no devices are actively connected. To
resolve this issue simply tap the power key and wait approximately 30 seconds for the Wi-Fi to turn back on. ‘Power saving’ mode is by default
disabled on the device.
16
WHY IS THE NETWORK LED ON MY DEVICE BLINKING RED?
This is because the device has no cellular network connection. Please check:
-
Is there a SIM card inserted?
-
Is the SIM card inserted the right way up?
-
Is there a SIM PIN active on the SIM card?
o
If so, you will need to log into the MyQ10 portal and enter the SIM PIN to activate the SIM card.
-
Have you travelled abroad? If so, you will need to log into the MyQ10 portal and enable data roaming.
-
Has the SIM reached its data limit?
-
Has your Cat Q10 loaded the correct APN?
o
You can check this by logging into the MyQ10 portal, navigating to ‘Internet > APN’. If there is no APN showing, you may need to add
one manually. If the APN is wrong, you can manually edit it. You may need to contact your operator to find out the correct APN
settings if you are unsure.
WHY DOES MY CAT Q10 NOT CONNECT TO THE INTERNET?
Please check the following:
-
Device is charged and powered on
-
A SIM card is inserted to the device
-
Check the led indicators on the device
o
Ensure you have network connectivity
o
Ensure you are connected to Wi-Fi or tethered to the Cat Q10.
-
Check you have not set and exceeded a data limit on your device.
-
Check you have a valid APN.
o
MyQ10 portal > Internet > APN
▪
Here you can modify or add new APNs.
17
APPENDIX
OPERATING TEMPERATURE
Keep the ambient temperature between 0°C and 45°C while the device is being charged. Keep the ambient temperature between -10°C (14°F) to
55°C (131°F) for using the device powered by a battery. Please
wear protective gloves while using it outside the range of 0°C (32°F) to 45°C
(113°F).
VIEWING THE E-LABEL
To view the regulatory
information on your
device,
do the following:
From the Home Screen, tap > Settings > Help > Privacy Policy.
CE SAR COMPLIANCE
This device meets the EU requirements (1999/519/EC) on the limitation of exposure of the general public to electromagnetic fields by way of
health protection.
The limits are part of extensive recommendations for the protection of the general public. These recommendations have been developed and
checked by independent scientific organizations through regular and thorough evaluations of scientific studies. The unit of measurement for the
European Council’s recommended limit for mobile devices is the “Specific Absorption Rate” (SAR), and the SAR limit is 2.0 W/ kg averaged over
10 grams of tissue. It meets the requirements of the International Commission on Non-Ionizing Radiation Protection (ICNIRP).
For body worn operation, this device has been tested and meets the ICNIRP exposure guidelines and the European Standard EN 62209-2, for use
with dedicated accessories. Use of other accessories which contain metals may not ensure compliance with ICNIRP exposure guidelines.
SAR is measured with the device at a separation of 5 mm to the body, while transmitting at the highest certified output power level in all of the
device’s frequency bands.
The highest reported SAR values under the CE regulatory for the phone are listed below:
Body SAR: 1.206 W/kg, Limbs SAR: 2.177 W/kg
To reduce exposure to RF energy, use a hands-free accessory or other, similar options to keep this device away from your head and body. The
device must be carried 5mm from the body to ensure exposure levels remain at or below the as-tested levels. Choose the belt clips, holsters, or
other similar body-worn accessories which do not contain metallic components to support operation in this manner. Cases with metal parts may
change the RF performance of the device, including its compliance with RF exposure guidelines in a manner that has not been tested or certified.
Thus, use of such accessories should be avoided.
To reduce the level of exposure to radiation, please do the following:
• Use the device in good reception conditions to reduce the amount of radiation received (in particular in underground car parks
and on train or car journeys).
• For pregnant women, please keep the device away from the stomach
• Use the device away from genital parts.
18
DISPOSAL AND RECYCLING INFROMATION
This symbol on the device (and any included batteries) indicates that they should not be disposed of as normal household garbage. Do
not dispose of the device or batteries as unsorted municipal waste. The device (and any batteries) should be handed over to a certified
collection point for recycling or proper disposal at the end of their life.
For more detailed information about the recycling of the device or batteries, contact your local city office, the household waste disposal service,
or the retail store where you purchased this device.
The disposal of the device is subject to the Waste from Electrical and Electronic Equipment (WEEE) directive of the European Union. The reason
for separating WEEE and batteries from other waste is to minimize the potential environmental impacts on human health from any of the
hazardous substances that may be present.
REDUCTION OF HAZARDOUS SUBSTANCES
This device is compliant with the EU Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) Regulation (EU Regulation (EC)
No 1907/2006 (REACH) of the European Parliament and of the Council) and the EU Restriction of Hazardous Substances (RoHS).
Directive (Directive 2011/65/EU (RoHS) and its amendment directive (EU) 2015/863 of the European Parliament and of the Council). It is
recommended to visit the Web site regularly for up-to-date information.
EU REGULATORY CONFORMANCE
Hereby, Bullitt Mobile Ltd. declares that this device is compliant with the essential requirements and other relevant provisions of Directive
2014/53/EU. For the declaration of conformity, visit the website: https://www.catphones.com/download/Certification
Authorised Representative:
Authorised Representative Service
77 Camden Street Lower
Dublin D02 XE80
Ireland
EU COMPLIANCE STATEMENT
This device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range. Restrictions in: Belgium (BE), Bulgaria (BG),
Czech Republic (CZ), Denmark (DK), Germany (DE), Estonia (EE), Ireland (IE), Greece (EL), Spain (ES), France (FR), Croatia (HR), Italy (IT), Cyprus
(CY), Latvia (LV), Lithuania (LT), Luxembourg (LU), Hungary (HU), Malta (MT), Netherlands (NL), Austria (AT), Poland (PL), Portugal (PT), Romania
(RO), Slovenia (SI), Slovakia (SK), Finland (FI), Sweden (SE), North Ireland(UK(NI)), Switzerland (CH), Norway (NO), Iceland (IS), Liechtenstein (LI)
and Turkey (TR).
NOTE:
Observe the national local regulations in the location where the device is to be used. This device may be restricted for use in some or all member
states of the European Union (EU).
Some bands may not be available in all countries or all areas. Please contact the local carrier for more details.
Maximum radio-frequency power transmitted in the frequency bands in which the radio equipment operates:
The maximum power for all bands is less than the highest limit value specified in the related Harmonised Standard.
19
The frequency bands and transmitting power nominal limits applicable to this radio equipment are as follows:
SPECTRUM AND POWER TABLE
Technology
Power
WCDMA 1
24 dBm
WCDMA 8
25 dBm
FDD-LTE B1
24 dBm
FDD-LTE B3
24 dBm
FDD-LTE B7
24 dBm
FDD-LTE B8
24 dBm
FDD-LTE B20
24 dBm
FDD-LTE B28
24 dBm
TDD-LTE B38
24 dBm
TDD-LTE B40
24 dBm
TDD -LTE B41
24 dBm
TDD –LTE B42
24 dBm
5GNR-n1
21.5 dBm
5GNR-n3
21 dBm
5GNR-n7
23.5 dBm
5GNR-n8
23.5 dBm
5GNR-n20
23.5 dBm
5GNR-n28
23.5 dBm
5GNR-n38
23.5 dBm
5GNR-n41
26.5 dBm
5GNR-n78
26.5 dBm
WLAN 2.4G
20 dBm
Wi-Fi: 5180 - 5240 MHz
23 dBm
Wi-Fi: 5260 - 5320 MHz
20 dBm
Wi-Fi: 5500 - 5700 MHz
27 dBm
Wi-Fi: 5745 - 5825 MHz
13.98 dBm
UKCA REGULATORY CONFORMANCE
Hereby, Bullitt Mobile Ltd. declares that the radio equipment with this declaration and bearing the UKCA Mark is in compliance with UK Radio
Equipment Regulations 2017. The full text of the UK declaration of conformity is available at the following internet
address:
https://www.catphones.com/download/Certification
UKCA COMPLIANCE STATEMENT
Restriction in the UK: 5150 to 5350 MHz indoor-use only
20
SAFETY INSRUCTIONS
WARNINGS
AND
PRECAUTIONS
This section contains important information relating to the operating instructions for this device. It also contains information about how to
use the device safely. Read this information carefully before using the
device.
WATERPROOF CASING
The SIM/SD door must be closed securely to ensure the device is waterproof.
DO NOT USE YOUR DEVICE IN THE FOLLOWING CONDITIONS:
Power off the device if you’re in a situation where using it is prohibited, for example:
•
Hospitals
and
healthcare
facilities
–
this
is
to
prevent
possible
interference
with
sensitive
medical
equipment.
•
Medical devices - please consult your doctor and the device manufacturer to determine if operation of your device may interfere with the
operation of your medical device. Follow the rules and regulations set forth by hospitals and healthcare facilities.
•
Pacemaker manufacturers recommend that a minimum distance of 5.9 inches be maintained between a
device and a pacemaker to prevent
potential interference with the pacemaker. If you have a pacemaker, use
the device on the opposite side of the pacemaker and do not carry the
device in your front pocket.
•
Aircraft – consult airline staff about the use of wireless devices on board the aircraft. If your device offers a ‘flight mode’, this must be enabled
prior to boarding an aircraft.
•
Other devices – do not use your device in a place where it could cause damage or interfere with other electronic devices.
•
Potentially explosive atmosphere – power off the device in any area with a potentially explosive atmosphere and comply with all signs and
instructions. Areas that may have potentially explosive atmospheres include the areas where it is advised to turn off a vehicle engine.
Triggering of sparks in such areas could cause an explosion or a fire, resulting in bodily injuries or even death. Do not turn on the device at
refueling points such as service stations. Comply with restrictions on the use of radio equipment in fuel depots, storage, and distribution areas,
and chemical plants. In addition, adhere to restrictions in areas where blasting operations
are in progress. Before using your device, watch out for
areas that have potentially explosive atmospheres that
are often, but not always, clearly marked. Such locations include areas below the deck on
boats, chemical transfer or storage facilities, and areas where the air contains chemicals or particles such as grain, dust, or metal powders. Ask
the manufacturers of vehicles using liquefied petroleum gas (such as propane or butane) whether this device can be safely used in their
vicinity.
OPERATING
ENVIRONMENT
•
The device complies with the RF specifications when the device is used at a distance of 0.4 inches from your body. Ensure that the device
accessories such as a device case and a device holster are not
composed of metal components. Keep the device 0.4 inches away from your body
to meet the requirement earlier mentioned.
•
On a stormy day with thunder, do not use the device when it is being charged to prevent any danger caused
by lightning.
•
While
using
the
device,
observe
the
local
laws
and
regulations,
and
respect
others’
privacy
and
legal
rights.
•
The
range
of
environmental
conditions:
•
Pollution Degree: “2”
Overvoltage Category: I
•
The
maximum
use
altitude:
not
more
than
2000
m
above
sea
level.
SAFETY
OF
CHILDREN
Comply with all precautions regarding children’s safety. Letting a child play with this device or its accessories, which may include parts that can be
detached from the device, may be dangerous, as it may present a choking hazard. Ensure that small children are kept away from the device and its
accessories.
21
BATTERY AND CHARGER
•
Unplug
the
charger
from
the
electrical
plug
and
the
device
when
not
in
use.
•
The
battery
can
be
charged
and
discharged
hundreds
of
times
before
it
eventually
wears
out.
•
Do not expose the battery in sunlight or smoky, dusty environment. A battery subjected to extremely low air pressure that may result in an
explosion or the leakage of flammable liquid or gas.
•
In the extremely unlikely event that battery electrolyte leaks out, ensure that the electrolyte does not come into contact with skin and eyes. If
the electrolyte touches skin or splashes into eyes, wash eyes with clean water immediately and consult a doctor.
•
If there is a case of battery deformation, color change, or abnormal heating while charging, stop using the device immediately. Otherwise, it may
lead to battery leakage, overheating, explosion, or fire.
•
Do not dispose of this device in fire as it may explode. Battery may also explode if pierced or severely
damaged.
•
Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water or other liquids, expose to fire,
explosion or other hazards.
•
Do
not
disassemble
or
open,
crush,
bend
or
deform,
puncture,
or
shred.
•
Only use the battery for the system for which it is specified
•
Only use the battery with a charging system that has been qualified with the system per CTIA Certification
Requirements for Battery System
Compliance to IEEE 1725. Use of an unqualified battery or charger may present a risk of fire, explosion, leakage, or other hazards.
•
Do not short circuit a battery or allow metallic conductive objects to contact battery terminals.
•
Replace the battery only with another battery that has been qualified with the system per this standard,
IEEE-Std-1725. Use of an unqualified
battery may present a risk of fire, explosion, leakage, or other hazards.
•
Promptly
dispose
of
used
devices
in
accordance
with
local
regulations.
22
CAT
®
Q10 SPECIFICATION
MODEL
BM1R1A
SKU
HW SKU 1, RF SKU1 EMEA/AUS/LATAM
DIMENSIONS
80.8 x 127.8 x 26.3mm
BATTERY
5300mAh
OS
Open WRT
RAM
8Gb LPDDR4
ROM
8Gb ECC NAND FLASH
PROCESSOR
MT6890V MEDIATEK
1,2,4,5,8,9
1,3,7,8,20,28,38,39,40,41,42
n1,n3,n7,n8,n12,n20,n25,n28,n38,n39,n41,n78
RUGGED
IP68
* Design and specifications are subject to change without prior notice.
41
© 2022 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, LET’S DO THE WORK, their respective logos, "Caterpillar
Yellow", the "Power Edge" and Cat “Modern Hex” trade dress as well as corporate and product identity used herein, are
trademarks of Caterpillar and may not be used without permission. www.cat.com / www.caterpillar.com
Bullitt Mobile Ltd. is a licensee of Caterpillar Inc.
Bullitt Mobile Ltd.’s and third-party trademarks are the property of their respective owners. Bullitt Mobile Ltd. One Valpy,
Valpy Street, Reading, Berkshire RG1 1AR, United Kingdom
Q10_User_Manual_EN_V3T
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cat Q10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cat Q10 in the language / languages: English as an attachment in your email.

The manual is 0.68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info