740165

Casio QW3475 - GBD-H1000 G-SQUAD Manual

25
Zoom out
Zoom in
Previous page
1/58
Next page
5. Use (A) and (D) to move the pointer to
[GPS].
6. Press (C).
7. Use (A) and (D) to move the pointer to
[USING GPS].
8. Press (C).
9. Use (A) and (D) to move the pointer to
[ON] (enabled) or [OFF] (disabled).
10. Press (C).
After the setting operation is complete,
[SETTING COMPLETED] will appear for
a few seconds, and then the GPS setting
screen will re-appear.
11. Use (A) and (D) to move the pointer to
[INTERVAL].
This option is for specifying the location
information acquisition interval by GPS
signal reception.
12. Press (C).
13. Use (A) and (D) to select a GPS receive
interval.
[NORMAL]
Acquires location info every
second.
[LONG]
Acquires location info every
minute.
14. Press (C) to complete the setting
operation.
After the setting operation is complete,
[SETTING COMPLETED] will appear for
a few seconds, and then the GPS setting
screen will re-appear.
15. Press (E) twice to exit the setting screen.
Note
●
You can also change the GPS receive
interval using G-SHOCK MOVE.
Checking the Altitude
Differential Between Your
Current Location and a
Checkpoint
You can use G-SHOCK MOVE during run
timing to check the altitude differential
between a checkpoint and your current
location.
●
You can specify up to 10 checkpoints.
1. Enter the Training Mode.
l
Navigating Between Modes
2. Press (D) three times.
This displays the altimeter navigation
screen.
Checkpoint altitude
Current location altitude
Differential between checkpoint
and current altitudes
Travel time
●
A pointer (
) to the right of the scale
along the left of the screen also
indicates the altitude differential
between the checkpoint and current
altitude. The appearance of the pointer
changes as described below.
This
pointer:
Means this:
Altitude differential of +100m (Or:
+100ft) or more
Altitude differential within -100 to
100m (-100 to 100ft)
Altitude differential of -100m (Or:
-100ft) or more
Each press of (A) switches the checkpoint
display.
Important!
●
You can use G-SHOCK MOVE to
specify checkpoints along a running
course. Note that you cannot configure
settings using watch operations.
Setting Up Alerts
You can specify calories burned, elapsed
time, and altitude target values for training.
Then, the watch will perform a sound and/or
vibration operation whenever a target value is
reached while you are training.
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Press (C).
This displays the GPS signal receive start
screen.
3. Press (A) or (D).
This displays the Training Mode screen.
4. Hold down (A) for at least two seconds.
This displays the Training Mode setting
screen.
Pointer
5. Use (A) and (D) to move the pointer to
[ALERT].
6. Press (C).
7. Use (A) and (D) to select the item whose
setting you want to change.
[CALORIES] Calories burned
[TIME 1] Time 1
[TIME 2] Time 2
[ALTITUDE] Altitude
8. Press (C).
9. Use (A) and (D) to select an alert setting.
[OFF] Disabled
[ON (REPEAT)] Enabled (repeat)
[ON (1 TIME)] Enabled (one time)
●
While [ON (REPEAT)] is selected, an
alert operation is performed whenever
a target value is reached.
10. Press (C) to complete the setting
operation.
After the setting operation is complete,
[SETTING COMPLETED] will appear for
a few seconds, and then the alert setting
screen will re-appear.
●
If you want to configure settings for
another item, repeat steps 7 through 10.
11.
Press (E) twice to exit the setting screen.
Operation Guide 3475
25
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio QW3475 - GBD-H1000 G-SQUAD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio QW3475 - GBD-H1000 G-SQUAD in the language / languages: English as an attachment in your email.

The manual is 4,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info