740165

Casio QW3475 - GBD-H1000 G-SQUAD Manual

26
Zoom out
Zoom in
Previous page
1/58
Next page
Important!
●
To specify the alert interval for each
item, use G-SHOCK MOVE. Note that
you cannot configure settings using
watch operations.
Note
●
You can also use G-SHOCK MOVE to
enable or disable alerts.
Displaying Your Actual
Running Distance
You can select either of two distance display
types: horizontal distance (straight-line
distance) or surface distance (actual
distance).
The surface distance display is calculated by
taking horizontal travel as well as vertical
movement into consideration.
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Press (C).
This displays the GPS signal receive start
screen.
3. Press (A) or (D).
This displays the Training Mode screen.
4. Hold down (A) for at least two seconds.
This displays the Training Mode setting
screen.
Pointer
5. Use (A) and (D) to move the pointer to
[DISTANCE].
6. Press (C).
7. Use (A) and (D) to move the pointer to [3D
DISTANCE].
8. Press (C).
9. Use (A) and (D) to select a setting.
[OFF] Displays horizontal distance.
[ON] Displays surface distance.
10. Press (C) to complete the setting
operation.
After the setting operation is complete,
[SETTING COMPLETED] will appear for
a few seconds, and then the distance
display setting screen will re-appear.
11. Press (E) twice to exit the setting screen.
Note
●
You can also use G-SHOCK MOVE to
change the distance display type.
Specifying the Distance Unit
Important!
●
When Tokyo (TOKYO) is the Home
City, the distance unit is fixed as
kilometers (km) and cannot be
changed.
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Hold down (A) for at least two seconds.
This displays the Timekeeping Mode
setting screen.
Pointer
3. Use (A) and (D) to move the pointer to
[UNIT].
4. Press (C).
5. Use (A) and (D) to move the pointer to
[DISTANCE].
6. Press (C).
7. Use (A) and (D) to select a distance unit.
[KILOMETER] Kilometers
[MILE] Miles
8. Press (C) to complete the setting
operation.
After the setting operation is complete,
[SETTING COMPLETED] will appear for
a few seconds, and then the unit setting
screen will re-appear.
9. Press (E) twice to exit the setting screen.
Note
●
You can also use G-SHOCK MOVE to
change the distance unit.
Enabling Auto Run Timing
(Auto Run Detection)
Starting to run while Auto Run Timing (auto run
detection) is enabled will cause run timing to
start automatically.
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Hold down (A) for at least two seconds.
This displays the Timekeeping Mode
setting screen.
Pointer
3. Use (A) and (D) to move the pointer to
[AUTO RUN DETECTION].
4. Press (C).
5. Use (A) and (D) to move the pointer to
[ON] (enabled) or [OFF] (disabled).
6. Press (C) to complete the setting
operation.
After the setting operation is complete,
[SETTING COMPLETED] will appear for
a few seconds, and then the Timekeeping
Mode setting screen will re-appear.
7. Press (E) to exit the setting screen.
Note
●
You can also use G-SHOCK MOVE to
enable or disable Auto Run Timing
(auto run detection).
Operation Guide 3475
26
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio QW3475 - GBD-H1000 G-SQUAD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio QW3475 - GBD-H1000 G-SQUAD in the language / languages: English as an attachment in your email.

The manual is 4,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info