740165

Casio QW3475 - GBD-H1000 G-SQUAD Manual

23
Zoom out
Zoom in
Previous page
1/58
Next page
5. Use (A) and (D) to move the pointer to
[NOTIFICATION].
6. Press (C).
7. Use (A) and (D) to move the pointer to
[ON] (enabled) or [OFF] (disabled).
8. Press (C) to complete the setting
operation.
After the setting operation is complete,
[SETTING COMPLETED] will appear for
a few seconds, and then the HR (Heart
Rate) mode setting screen will re-appear.
9. Press (E) to exit the setting screen.
Heart Rate Measurement
Precautions
Heart Rate Measurement Functions
●
The back cover of the watch has a built-in
sensor that detects your pulse. This is used
to calculate and display an approximate
heart rate value. The factors below can
cause error in the displayed heart rate
value.
ー　
How the watch is affixed to the wrist
ー　
Individual wrist characteristics and
condition
ー　
Training type and/or intensity
ー　
Sweat, dirt, and/or other foreign matter
around the sensor
All of this means that heart rate values
displayed by the watch are approximate, and
no guarantees are made concerning their
accuracy.
●
The heart rate measurement function of this
watch is intended for recreational purposes,
and should not be used in any way for
medical purposes.
●
Heart rate measurement is automatically
disabled when the battery level indicator
shows
or lower.
Wrist Heart Rate Measurement Sleep
(Power Saving)
Regardless of whether or not you are wearing
the watch, the heart rate measurement sensor
will automatically stop measurement and
enter a sleep state if you do not move for a
certain amount of time.
If heart rate measurement does not start when
you strap the watch onto your wrist, it will start
when you move your wrist.
Precautions When Putting on
the Watch
Correctly wearing the watch on your wrist is
essential obtain more accurate heart rate
measurements. Position the watch on your
wrist as described below.
1. With the watch fastened loosely on your
wrist, place at least one finger to the right
of the pressure sensor on the right side of
the watch* (Figure
A
).
* If you wear the watch on your right wrist,
place your finger(s) to the left of the (C)
button (left side of the watch).
Figure A
●
If the watch covers the protruding bone
of your wrist (your ulna, which is circled
in the nearby figure), keep adding
fingers until it doesn’t anymore.
●
The location and shape of this bone
differ from person to person.
2. Position the watch so there is at least one
finger width between it and your wrist joint
when you bend your hand back (Figure
B
).
Figure B
3. After you determine the best wrist position
for the watch, tighten the band securely
enough to keep the watch from sliding on
your wrist.
Important!
●
A band that is snugly tightened for
heart rate measurement can make it
difficult for air to pass under the band
and cause you to sweat, which can
lead to skin irritation. After you are
finished measuring your heart rate,
loosen the band enough so you can
insert a finger between it and your
wrist.
Using the Training
Function
The Training Function uses GPS and an
accelerometer to measure and record
distance, elapsed time, pace, and other data
while you are running or walking.
You can review recorded data on the watch or
with G-SHOCK MOVE.
Run Timing
Using the Training Function, start running.
●
Starting Run Timing
1.
Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Press (C).
This causes the watch to start searching
for GPS signals.
Run timing using GPS is enabled when
the on-screen message changes to [GPS
CAPTURE].
Operation Guide 3475
23
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio QW3475 - GBD-H1000 G-SQUAD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio QW3475 - GBD-H1000 G-SQUAD in the language / languages: English as an attachment in your email.

The manual is 4,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info