816489
10
Zoom out
Zoom in
Previous page
1/33
Next page
RVZ-500 Operation manual
page 10 03/2021
3. Prior to Starting
3.1. Check - Oil Level
It is highly recommended to check regularly the
engine oil level even on machines equipped with
the oil sensor.
Clean the filling hole before checking or adding
oil. Wipe dry the dipstick and immerse it in the
oil without screwing it in.
If necessary, add specified sort of oil up to the
upper mark.
NOTE :
Operation with insufficient oil level may cause
serious damage to the engine.
Check the engine oil level daily!
3.2. Visual Inspection of the Machine
Check regularly the machine for:
missing parts
released bolts and screws
oil or fuel leakage
free motion of the cutting disc spindle
Pay special attention to safety devices (covers)
and controls.
3.3. Adding Fuel
1. Gasoline engines:
Use unleaded or leaded gasoline for motor
vehicles, with octane number 91 or more.
Top up fuel as necessary.
Never use dirty fuel or mixture with oil.
Avoid water and dust from entering the fuel
tank.
3.4. Check - Air Filter
Check the air filter for cleanness on a daily
basis. Clean or replace the filter if dirty.
Never run the machine with air filter missing or
damaged. Dust and dirt which get into the
engine would cause rapid wear.
Fig. Air filter - HONDA
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Carat VZ-500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Carat VZ-500 in the language / languages: English as an attachment in your email.

The manual is 1.94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info