816489
8
Zoom out
Zoom in
Previous page
1/33
Next page
RVZ-500 Operation manual
page 8 03/2021
2. TECHNICAL DESCRIPTION
The RVZ-500 is intended for cutting of asphalt
and concrete floors or road layers when
repairing roads, industrial areas, etc.
The machine is based on a rigid frame with fixed
spindle; the cutting disc is lowered to the cut
together with the whole frame. Lowering and
rising of the cutting disc is controlled by means
of a arrested handle that enables fine regulation
of cutting depth.
The machine is intended for wet cutting and
therefore it is equipped with a sprinkling system.
Water for sprinkling can be brought either from
machines-mounted water tank of from external
source.
The machines can be used also for dry cutting,
assuming a suitable cutting disc is used. This
method however causes high generation of dust
and thus breathing protection would be required.
The machine is driven by a single-cylinder, four-
stroke gasoline engine HONDA.
Travel is manual; the operator pushes the
machines by height-adjustable handle.
2.1. Basic Technical Data:
RVZ-500
Cutting depth
(mm)
170
Cutting disc fastening
at right
Max. disc dia
(mm)
500
Travel
manual
Cutting depth adjustment
manual
Arbor hole dia
(mm)
25,4 + PH
Spindle speed
(RPM)
2800
Water tank capacity
(ltr)
20
Weight
(kg)
106
Dimensions L x W x H
(mm)
1050x530x1040
Engine
HONDA
Type
GX 390 Cyclon
Power
(kW)
9,6
Speed
(RPM)
3600
Oil sensor
yes
Fuel consumption
(ltr/hr)
1,5
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Carat VZ-500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Carat VZ-500 in the language / languages: English as an attachment in your email.

The manual is 1.94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info