816489
11
Zoom out
Zoom in
Previous page
1/33
Next page
RVZ-500 Operation manual
page 11 03/2021
4. Operation
4.1. Starting
4.1.1. Gasoline Engine HONDA
1. Turn the fuel tap into the ON position.
2. Turn on the electric switch of ignition .
3. Engage the choke („CHOKE“). Do not use it
at warm engine or at high ambient
temperature.
4. Adjust the throttle control lever to idle.
5. Pull out the starter grip slowly till some
resistance is felt, then pull vehemently. Do
not release the grip, but return it slowly into
the original position.
6. Let the engine warm up, then disengage the
choke.
7. Let the engine run at idle for a while before
applying full load.
8. For cutting, shift the throttle control lever to
fully open position.
DANGER!
The spindle and the cutting disc start to
rotate immediately. Be sure that the revolving
disc can not cause any danger for the
bystanders. Have the disc cover installed
before starting.
4.2. Operation
4.2.1. Selection of the Cutting Disc
For safe and efficient operation, right selection
of the cutting disc is highly important. Choose a
high-quality diamond cutting disc and
appropriate type depending on the material to be
cut (asphalt, concrete).
Cutting discs of most suppliers are divided in
quality categories (standard/profi etc.),
sometimes also according to length and height of
the diamond segments, spacing, etc.
Cutting disc diameter is to be selected according
to the type of the machine; if possible, choose
always the maximal allowed diameter. The
spindle speed is adjusted for this size to keep
optimal circumferential cutting speed of the disc.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Carat VZ-500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Carat VZ-500 in the language / languages: English as an attachment in your email.

The manual is 1.94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info