Manual Brother LS1317 (page 15 of 81) (English, French, Portuguese, Spanish)

555743

Zoom out

Zoom in

1/81

CONTENTS INDEXMAINTENANCE

KNOWING YOUR

SEWING MACHINE

STRAIGHT AND

ZIGZAG STITCHING

BUILT-IN STITCHES

BUTTONHOLE AND

BUTTON SEWING

USING ATTACHMENTS

AND APPLICATIONS

Main Power and Sewing Light Switches

This switch turns the main power and sewing light on or off. (See fig.

A.)

1 Turn on (toward the “I” mark)

2 Turn off (toward the “O” mark)

Foot Controller

When the foot controller is depressed lightly, the machine will run at a

low speed. When the pressure on the foot controller is increased, the

machine’s speed will increase. When pressure on the foot controller is

released, the machine will stop. (See fig. B.)

NOTE:

1. Be sure that nothing is placed on the foot controller when the ma-

chine is not being used.

2. A new sewing machine or one that has not been in use for a long

period of time should be oiled as described on page 45. After oil-

ing, be sure to wipe off any excess oil.

Note (For U.S.A. only):

This foot controller can be used for sewing machine model LS1217.

A B

Interrupteur principal et de la lampe

Cet interrupteur permet l’alimentation secteur et d’allumer ou d’étein-

dre la lampe de la machine à coudre.(Voir fig. A.)

Allumer (vers le repère “I”)

Eteindre (vers le repère “O”)

Pédale

Lors d’une dépression légère de la pédale, la machine fonctionnera

lentement. Si l’on augmente la pression, la vitesse de la machine aug-

mentera. Lorsque la pédale est relâchée, la machine s’arrête. (Voir fig.

B.)

REMARQUE:

1. S’assurer de ne rien placer sur la pédale lorsque la machine n’est

pas utilisée.

2. Il est nécessaire d’huiler une nouvelle machine ou une machine

n’ayant pas été utilisée pendant une longue période de temps se-

lon les instructions page 45. Après l’avoir huilée, essuyer tout ex-

cédent d’huile.

REMARQUE (Uniquement pour les Etats-Unis) :

Cette pédale peut être utilisée avec les modèle de machines à coudre

LS1217.

Interruptor principal y de luz

Este interruptor permite apagar y encender la máquina y la luz. (Ver

fig. A.)

1 Encender (hacia la marca “I”)

2 Apagar (hacia la marca “O”)

Pedal

Al presionar ligeramente el pedal, la máquina funcionará a baja ve-

locidad. Al aumentar la presión, se incrementa también la velocidad

de la máquina. Al soltar el pedal, la máquina se para. (Ver fig. B.)

NOTA:

1. Asegúrese siempre de no dejar ningún objeto sobre el pedal cuan-

do la máquina no está utilizada.

2. Una nueva máquina de coser o que no haya sido utilizada por

mucho tiempo debe ser lubricada tal como se indica en la página

45. Después de la lubricación, asegúrese siempre de limpiar todo

el excedente de aceite.

Nota (Sólo para EE.UU.):

Este pedal puede usarse para los modelo de máquina de coser

LS1217.

Interruptor de Força Principal e da Luz

de Costura

Este interruptor permite ligar e desligar a força principal e a luz de costura.

(Veja fig. A.)

1 Ligar (posicionar na marca “I”)

1 Desligar (posicionar na marca “O”)

Reostato

Quando o reostato for pressionado levemente, a máquina funcionará a bai-

xa velocidade. Quando a pressão no reostato for aumentada, a velocidade

da máquina também aumentará. Quando a pressão no reostato for liberada,

a máquina irá parar. (Veja fig. B.)

NOTA:

1. Certifique-se de que nada seja colocado sobre o reostato quando a má-

quina não estiver em funcionamento.

2. Uma máquina de costura nova ou que não tenha sido usada por um

longo intervalo de tempo deverá ser lubrificada conforme descrito na

página 45. Após a lubrificação, certifique-se de remover qualquer ex-

cesso de óleo.

Nota (Somente para os E.U.A.):

Este reostato pode ser usado nos modelo de máquina de costura LS1217.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brother LS1317 in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brother LS1317 Manual

Product: