555743

Brother LS1317 Manual

17
Zoom out
Zoom in
Previous page
1/81
Next page
7
CONTENTS INDEXMAINTENANCE
KNOWING YOUR
SEWING MACHINE
STRAIGHT AND
ZIGZAG STITCHING
BUILT-IN STITCHES
BUTTONHOLE AND
BUTTON SEWING
USING ATTACHMENTS
AND APPLICATIONS
Changing the Presser Foot
It may be necessary to change the presser foot according to your sew-
ing needs.
SNAP-ON TYPE
Turn power switch to “O”.
1. Raise the needle to its highest position by turning the balance wheel
toward you (counterclockwise), then raise the presser foot lever.
2. Use a coin or screwdriver to loosen the presser foot screw and
remove the presser foot.
1 Coin
2 Loosen
3. Place the grooved side of the presser foot against the flat side of the
presser bar.
4. Securely tighten the presser foot screw with the coin or screwdriver.
3 Tighten
1
2
3
Changement de pied-de-biche
Il sera parfois nécessaire de changer le pied-de-biche selon les be-
soins.
MODELE A CLIQUET
Mettre l’interrupteur principal sur “O”.
1. Remonter complètement l’aiguille en tournant le volant vers soi
(dans le sens contraire des aiguilles d’une montre), puis remonter
le levier du pied-de-biche.
2. Utiliser une pièce de monnaie ou un tournevis pour desserrer la vis
du pied-de-biche puis retirer le pied-de-biche.
1
Pièce de monnaie
2
Desserrer
3. Placer le côté rainuré du pied-de-biche contre le côté plat de la
tige du pied-de-biche.
4. Bien resserrer la vis du pied-de-biche à l’aide d’une pièce de mon-
naie ou d’un tournevis.
1
Resserrer
Cambio del prensatelas
Según sus necesidades de costura, puede ser necesario cambiar el
prensatelas.
MODELO A PRESIÓN
Coloque el interruptor principal en “O”.
1. Levante la aguja a su posición más alta, girando la ruedecilla
hacia usted (en el sentido contrario al de las manecillas de un
reloj) y luego levante la palanca del prensatelas.
2. Utilice una moneda o un destornillador para aflojar el tornillo del
prensatelas y retirar el prensatelas.
1 Moneda
2 Aflojar
3. Coloque la parte del prensatelas con ranura contra la parte llana
de la barra de soporte.
4. Apriete cuidadosamente el tornillo del prensatelas con la mone-
da o el destornillador.
3 Apretar
Substituição do Pé Calcador
Pode ser necessário trocar o pé calcador de acordo com as suas necessida-
des de costura.
TIPO INSTANTÂNEO
Gire o interruptor de força até “O”.
1. Eleve a agulha até a sua posição mais alta, rodando o volante em direção
a você (sentido anti-horário), e então levante a alavanca do pé calcador.
2. Utilize uma moeda ou uma chave de fenda para afrouxar o parafuso do
pé calcador e remova o pé calcador.
1 Moeda
2 Afrouxar
3. Coloque o lado sulcado do pé calcador contra o lado achatado da barra
para pé calcador.
4. Aperte firmemente o parafuso do pé calcador com uma moeda ou chave
de fenda.
3 Apertar
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother LS1317 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother LS1317 in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info