631281
16
Zoom out
Zoom in
Previous page
1/78
Next page
7
KENNENLERNEN IHRER MASCHINE
CONNAÎTRE SA MACHINE À COUDRE
BASISKENNIS
CONOSCERE LA MACCHINA DA CUCIRE
Nähfuß wechseln
Es kann nötig sein, den Nähfuß zu wechseln, je nachdem, was Sie
nähen möchten.
SCHNAPPVERSCHLUSS
Netzschalter auf O stellen.
1. Bringen Sie die Nadel in die höchste Position, indem Sie das Hand-
rad zu sich bewegen (entgegen dem Uhrzeigersinn). Heben Sie
dann den Nähfußhhebel an.
2. Verwenden Sie eine Münze oder einen Schraubenzieher, um die
Nähfußschraube zu lösen und den Nähfuß zu entfernen.
1 Münze
2 Lösen
3. Die gerillte Seite des Nähfußes gegen die flache Seite der
Andrückstange setzen.
4. Befestigen Sie die Nähfußschraube mit der Münze oder dem Schrau-
benzieher fest.
3 Festziehen
1
2
3
Changement de pied-de-biche
Il sera parfois nécessaire de changer le pied-de-biche selon les be-
soins.
MODELE A CLIQUET
Mettre linterrupteur principal sur O.
1. Remonter complètement laiguille en tournant le volant vers soi
(dans le sens contraire des aiguilles dune montre), puis remonter
le levier du pied-de-biche.
2. Utiliser une pièce de monnaie ou un tournevis pour desserrer la vis
du pied-de-biche puis retirer le pied-de-biche.
1
Pièce de monnaie
2
Desserrer
3. Placer le côté rainuré du pied-de-biche contre le côté plat de la
tige du pied-de-biche.
4. Bien resserrer la vis du pied-de-biche à laide dune pièce de mon-
naie ou dun tournevis.
1
Resserrer
De persvoet vervangen
Voor het uitvoeren van de verschillende functies met uw naaima-
chine, zijn er verschillende naaldvoeten, ook wel “persvoeten” ge-
noemd, nodig.
TYPE MET KNIPBEVESTIGING
Aan/uit-schakelaar op “O” zetten.
1. Draai het balanswiel naar u toe (linksom) en zet de naald in de
hoogste positie. Trek de persvoethendel omhoog.
2. Gebruik een muntstuk of schroevendraaier om de persvoetschroef
los te draaien en verwijder de persvoet.
1 Muntstuk
2 Losdraaien
3. Plaats de gegroefde zijde van de persvoet tegen de platte kant
van de persvoetstang.
4. Draai de persvoetschroef stevig met een muntstuk of schroeven-
draaier vast.
3 Vastdraaien
Sostituzione del piedino premistoffa
In base al lavoro da eseguire, può rendersi necessario sostituire il piedino
premistoffa.
PIEDINO A INNESTO AUTOMATICO
Posizionare l’interruttore principale su “O”.
1. Sollevare al massimo l’ago ruotando il volantino verso se stessi (in sen-
so antiorario), quindi sollevare la leva del piedino premistoffa.
2. Allentare la vite del piedino premistoffa con una moneta o un cacciavi-
te, quindi togliere il piedino premistoffa.
1 Moneta
2 Allentare
3. Posizionare la parte scanalata del piedino premistoffa contro la parte
piatta della barra di pressione.
4. Stringere a fondo la vite del piedino premistoffa con una moneta o un
cacciavite.
3 Stringere
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother LS-1717 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother LS-1717 in the language / languages: German, Dutch, French, Italian as an attachment in your email.

The manual is 1,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother LS-1717

Brother LS-1717 User Manual - English, French, Portuguese, Spanish - 82 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info