➢Read through the charger operating instruction before using it.
➢Make sure you charge the battery every time after you use the power chair or scooter.
➢Charge the battery at least 24 hours a week if the power chair or scooter has not been used. (This is to make sure that the electrolyte is always at the top
level)
➢If the battery cannot be charged (Orange light cannot turn to Green) or if the Orange light turns to Green immediately, please check it with the technicians.
The battery may be defective.
➢The voltage difference between the two batteries on a power unit cannot be more than 0.5 V; the battery case should be inspected for cleanliness and
evidence
of damage.
➢If the charger indicates red light, please kindly check ifthe charger isdefectedor ifthe cable wiring connection is poor.
➢Please keep the battery terminals clean otherwise the charging condition will be poor.
➢Only technicians or authorized dealers are allowed to replace the PU tire if required.
Handling at assembly
1) In case of adding strong shock to battery or dropping battery, do not use the battery.
2) In case of distorting battery, do not use the battery.
Storage
1) It shall be kept in shipping condition (within 40%~60% SOC or 25V~26V voltage range) for long period.
2) It is recommended to inspect the battery pack every 6 month to ensure the battery pack is at the best status for long term storage.
If battery pack is out of the storage condition, specified in 1), it shall be charged or dischargedto the recommended storage condition.
3) It shall be kept in dry condition of low humidity, especially be free from high temperature.
4) Do not storage the battery near heat sources, nor in a place subject to direct sunlight to storage in warehouse.
5. Prohibition Clause
1) Do not throw the battery into fire, nor heat the battery.
2) Do not disassemble nor modify the battery Pack.
3) Do not leave the battery in a place of high temperature.( 45ºC or more)
4) Do not immerse battery inwater, nor leaving in high moisture.
5) Do not add strong shock, nor drop the battery.
6) Do not solder lead directly to the battery body.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for BRIO S19F at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of BRIO S19F in the language / languages: English as an attachment in your email.
The manual is 4.92 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
