P&G S-Drive 45 Amp controller: Your scooter is fitted with S-Drive controller, which continuously monitors the operating conditions of your scooter. If it detects a
problem it will indicate with error message by flashing light on the power ON/ OFF light. You must count the number of the flash, and see the list to check what kind of
error has happened according to the number)
TROUBLE SHOTTING & ERROR CODE
Flash Code
Error Description
1
The battery needs charging or there is a bad connection to the battery. Check the connections to the battery. If the connections are good, try
changing the battery
2
There is a bad connection to the motor. Check all the connections between the motor and the controller
3
The motor has a short circuit to a battery connection. Contact your service agent.
4
The free wheel switch is activated or the manual brake disengagement mechanism is operated. Check the position of the switch of lever.
5
Not used
6
The S-Drive is being inhibited from driving. Inhibit 2 is active. This may be because the battery charger is connected or the seat is no in the
driving position.
7
A throttle fault is indicated. Make sure that the throttle is in the rest position before switching on the scooter.
8
A controller fault is indicated. Make sure that all connections are secured.
9
The parking brakes have a bad connection. Check the parking brake and motor connections. Make sure the controller connections are secured.
10
An excessive voltage has been applied to the controller. This is usually caused by a poor battery connection. Check the battery connections.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for BRIO S19F at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of BRIO S19F in the language / languages: English as an attachment in your email.
The manual is 4.92 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
