5. AC cable: National wall plug type upon request.
Operation procedures:
1. Attention! Connect charger first toAC power *before*connecting the battery to the
charger. Plug into AC mains the “power on” indicator will be on and the “Status” indicator will be GREEN, then connecting the battery packto charger.
2. If short circuit at output is found, the “Status” indicator will flash betweenRED (16ms) and GREEN (496ms). The flash will be there until the system is
reset and the short part is removed.
3. During charging, the “Status” indicator turns on RED. When full, it turns on GREEN.
THE INDICATOR SIGNAL CHART
LED 1
LED 2
Indicators
Condition
OFF
ON
Power On
(Power on by plugging in AC source and without battery)
Flashing in three times then ON
ON
OFF
Constant Current Mode
ON
OFF
Constant Voltage Mode
ON
ON
Battery Fully Charged
(Terminate Current ≤ 300 ± 100mA)
Slow Flash
OFF
Pre-Charged Mode
Red and Green LEDs Flash
synchronous
Pre-Charged Mode Fail
Red and Green LEDs
Quickly Flash alternately
Over Voltage, Over Current, CC CV Mode Current Fail
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for BRIO S19F at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of BRIO S19F in the language / languages: English as an attachment in your email.
The manual is 4.92 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
