716531
14
Zoom out
Zoom in
Previous page
1/136
Next page
14
USING YOUR BREAD MAKER
Note: Depending on the cycle or recipe used, some steps may
not apply or there may be additional steps. Refer to the
respective recipes instructions in the recipes portion
of this book, as well as the specific cycle instructions
located at the end of these usage instructions.
1. Open lid and remove bread pan. Lift
bread pan straight up and out using
the handle (B).
Caution: Do not turn or shake bread
pan while taking it out. If the bread pan
is bent, temperature sensor may
not work properly.
2. Position kneading paddle on the
drive shaft. Match flat side of drive
shaft to flat part of hole in kneading
paddle (C).
Make sure paddle is secure.
3. Place ingredients into the bread pan.
Note: As you add ingredients into
the bread pan, the collapsible
kneading paddles may fall; this
is normal. Paddles will stand up
automatically once the cycle is started.
Important: Add ingredients to bread pan in the order listed in
the recipe.
Important: Always add yeast last.
4. Make small indentation on top of dry
ingredients (not so deep it reaches
the wet layer) and add yeast (D).
Important:
Indentation for yeast is
important, especially when using
the delay bake timer. It keeps yeast
away from the wet ingredients until
the kneading process begins. (Liquid
ingredients will prematurely activate
the yeast.)
5. Insert the bread pan into the baking
chamber (E). Press down on rim of
bread pan until it snaps securely into
place.
6. Close the lid. If your recipe includes
extra ingredients such as fruits or
nuts (listed after the yeast in the
recipe), add these to the automatic fruit and dispenser.
Important: Do not exceed
2
/
3
cup capacity.
Important: Do not pour liquids or spices into dispenser.
Always make sure fresh fruit or vegetables are not wet;
pat dry before putting them in the dispenser.
7. Plug into standard electrical outlet. Bread maker will beep
and program 1 and 3:25 will appear in the display window.
E
B
C
D
Dry
Yeast
Liquid
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Breadman BK2000BQ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Breadman BK2000BQ in the language / languages: English as an attachment in your email.

The manual is 4,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info