Step 5) Dispensing
Important:
Check there is a magnet in your glass, and
that it is placed centrally on the metal ring.
If not, insert a magnet or adjust it until it is
central.
Position your glass - or reusable cup - with
its magnet centrally over the dispensing
valve so that your glass and metal ring are
level over the dispenser.
Carefully press your glass down. You will
notice the magnet lifting from the base of
the glass. When you press your glass all the
way down, the beer dispensing mechanism
is triggered, lling your glass with beer from
the bottom up.
To stop the flow of beer, lift your glass.
Important:
It is your own responsibility to stop the
dispensing process at the right moment to
prevent your glass overflowing.
For best results, always use beer that has
been sufciently chilled in advance.
