Manual Bottoms Up Beer Beer Buddy (page 35 of 46) (English, German)

704389

Zoom out

Zoom in

1/46

Step 4) Assembling the Beer Buddy

Now take the keg and the attached dispenser and place them in the empty

Beer Buddy. To get a good grip on the keg, we recommend holding the moun-

ting bracket to move it.

Now place the drip plate on top.

You’ve done it! Your Beer Buddy is now ready to use.

Further details on dispensing can be found at ‘Step 5’.

Caution:

If you are moving your Buddy, please remember that agitation and transport

can cause pressure to build up due to the carbon dioxide in the keg. You

should wait at least 5 minutes after moving to allow the pressure to subside

before continuing to dispense beer.

Important:

The keg and attached dispenser will only t

in the container the right way around.

Please take note of the cut-outs in the cont-

ainer for the knurled screws, and the cut-out

for the pressure regulator.

Insert the keg and dispenser correctly, so

that the pressure regulator and the knurled

screws sit in their respective cut-outs.

You’ve almost nished!

Now insert the drip tray. The drip tray has

a cut-out in one corner for the pressure

regulator, opposite which is a smaller cut-out

to enable removal of the drip tray from the

Buddy.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bottoms Up Beer Beer Buddy in the language / languages: English, German as an attachment in your email.

The manual is 2,05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bottoms Up Beer Beer Buddy Manual

Product: