Manual Bottoms Up Beer Beer Buddy (page 38 of 46) (English, German)

704389

Zoom out

Zoom in

1/46

Changing a keg

Remove the drip plate and the drip tray.

Lift the keg and dispenser out of the container and place them on a secure,

flat surface.

Now close the pressure regulator. To do this, turn the pressure regulator

anticlockwise until it stops.

Next, for your own safety, open the safety

valve, which is located at the top of the

mounting bracket. Release any residual pres-

sure from the keg by pulling on the ring.

Loosen the knurled screws on each side of

the mounting bracket. Grasp the bracket in

the middle above the tapper and draw it out

of the empty beer keg.

Maintenance

It is important that the dispenser is always kept in perfect condition. We have

designed the Beer Buddy to be especially tough, with both a sturdy container

and robust components, to give you lasting pleasure from your purchase.

However, it is important to keep an eye on the dispenser and check it at

regular intervals.

Check the dispenser at every CO2 cartridge change and every keg change.

Examine the dispenser by eye and by hand to check it is still in factory condi-

tion.

Important:

The keg, the lines and the CO2 cartridge are pressurised.

If anything has come unscrewed, do not operate the Beer Buddy.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bottoms Up Beer Beer Buddy in the language / languages: English, German as an attachment in your email.

The manual is 2,05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bottoms Up Beer Beer Buddy Manual

Product: