Manual Bosch UniversalRake 900 (page 14 of 303) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian)

777045

Zoom out

Zoom in

1/303

14 | English

uWorking on banks can be dangerous.

Always be sure of your footing on

slopes or wet grass.

Rake/Verticut across the face of

slopes never up and down.

− Exercise extreme caution when

changing direction on slopes.

uUse extreme caution when stepping

back or pulling the machine towards

you do not overreach and keep bal-

ance at all times.

uAlways push the product forward

when raking/verticutting the lawn

and never pull it towards the body.

uWait until the tines/blades stop if the

machine has to be tilted for trans-

portation when crossing surfaces

other than grass and when transport-

ing the product to and from the area

to be raked/verticut.

uNever operate the machine with de-

fective guards or shields, or without

safety devices, for example deflect-

ors and/or grass box in place.

uSwitch on the motor according to the

instructions with feet well away from

rotating parts.

uDo not tilt the product when starting

or switching on the motor, except if

the machine has to be tilted for start-

ing in long grass. In this case, do not

tilt it more than absolutely necessary

and tilt only the part which is away

from the operator. Always ensure

that both hands are in the operating

position before returning the ma-

chine to the ground.

uDo not put hands or feet near or un-

der rotating parts.

uAlways stand clear of the discharge

zone when operating the machine.

uNever pick up or carry the machine

while the motor is running.

uWhen storing, make sure that all 4

wheels of the garden tool stand on

the ground/floor.

uOnly lift the garden tool with the car-

rying handle. Use the carrying handle

with care.

uDo not modify the machine. Unau-

thorized modifications can impair

the safety of your machine, lead to

increased noise and vibrations, and

poor performance.

uBe careful during adjustment of the

product to prevent entrapment of

the feet and hands between moving

tines/blades and fixed parts of the

machine.

uAvoid operating the product in bad

weather conditions especially when

there is a risk of lightning.

uRegularly inspect the machine in-

cluding the supply cable and any ex-

tension cables for damaged casings,

cable sheaths, exposed wires and

cable grips. Do not connect dam-

aged cables to the supply or touch a

damaged cable before it is discon-

nected from the supply. A damaged

cable can lead to contact with live

parts. Beware electric shock hazard

when inspecting for potential con-

tact between water and electricity.

F 016 L94 116 | (17.02.2021) Bosch Power Tools

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch UniversalRake 900 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian as an attachment in your email.

The manual is 5.58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch UniversalRake 900 Manual

Product: