Manual Bosch UniversalRake 900 (page 16 of 303) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian)

777045

Zoom out

Zoom in

1/303

16 | English

current of not more than 30 mA. Al-

ways check your RCD every time you

use it.

Keep the supply cables away from

moving hazardous parts and avoid

damage to the cables; this can lead to

contact with live parts.

The connections (plugs and sockets)

should be kept dry and off the ground.

The supply cables must be inspected

for signs of damage at regular intervals

and may only be used if in perfect con-

dition.

If the supply cable on the product is

damaged, it must only be replaced by

a Bosch Service Centre. Only use ap-

proved extension cables.

Use only extension cords, cables,

leads and cable reels that comply with

EN 61242/IEC 61242 or IEC

60884-2-7 and are of type H05VV-F

or H05RN-F.

If you want to use an extension cable

when operating your product, only the

following cable dimensions should be

used:

– Nominal conductor area of

1.25mm2 or 1.5mm2

– Maximum length 30m for a Cord

Extension Set or maximum length

of 60m for a Cable Reel with Re-

sidual Current Device (RCD).

Note: If an extension cable is used it

must be earthed and connected

through the plug to the earth cable of

your supply network in accordance

with prescribed safety regulations.

If in doubt contact a qualified electri-

cian or the nearest Bosch Service

Centre.

WARNING! Inadequate ex-

tension cables can be dan-

gerous. Extension cable,

plug and socket must be of water-

tight construction and intended for

outdoor use.

For products not sold in GB:

WARNING: For your safety, it is re-

quired that the plug attached to the

product is connected with the exten-

sion cord. The coupling of the exten-

sion cord must be protected against

splash water, be made of rubber or

coated with rubber. The extension

cord must be used with a cable strain

relief.

Products sold in GB only:

Your product is fitted with an BS

1363/A approved electric plug with in-

ternal fuse (ASTA approved to BS

1362).

If the plug is not suitable for your

socket outlets, it should be cut off and

an appropriate plug fitted in its place

by an authorised customer service

agent. The replacement plug should

have the same fuse rating as the ori-

ginal plug.

The severed plug must be disposed of

to avoid a possible shock hazard and

should never be inserted into a mains

socket elsewhere.

Products that are only sold in AUS

and NZ: Use a residual current device

F 016 L94 116 | (17.02.2021) Bosch Power Tools

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch UniversalRake 900 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian as an attachment in your email.

The manual is 5.58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch UniversalRake 900 Manual

Product: