708263
18
Zoom out
Zoom in
Previous page
1/129
Next page
18 | English
1 609 92A 4K3 | (12.10.2018) Bosch Power Tools
Application tool Material Application
Bi-metal plunge cut
saw blade for wood
and metal
Softwood, soft plastics,
plasterboard, thin-walled
aluminium profiles and
non-ferrous metal pro-
files, thin sheet metal,
non-hardened nails and
screws
Small separating cuts and plunge cuts;
example: Cutting a recess for sockets, cutting a copper
pipe so that it is flush with a surface, making plunge cuts in
plasterboard
Delicate adaptation work in wood;
example: Sawing recesses for locks and fittings
HCS plunge cut
saw blade for wood
Wood-based materials,
soft plastics
Separating cuts and plunge saw cuts;
including sawing close to edges, in corners and in difficult-
to-reach areas;
example: Thin plunge cut in solid wood for installing a
ventilation grille
Bi-metal plunge cut
saw blade, hard-
wood
Hardwood, laminated
boards
Plunge cuts in laminated boards or hardwood;
example: Installation of skylights
TC plunge cut saw
blade, metal
Metal, extremely abrasive
materials, fibreglass, plas-
terboard, cement-bonded
fibreboard
Plunge cuts in extremely abrasive materials or metal;
example: Cutting kitchen front covers, easy cutting
through hardened screws, nails and stainless steel
Bi-metal plunge cut
saw blade for wood
and metal
Softwood, hardwood,
veneered boards, plastic-
coated boards, non-
hardened nails and
screws
Plunge cuts in laminated boards or hardwood;
example: Shortening door frames, recesses for a shelf
TC-Riff segment
saw blade
Cement joints, soft wall
tiles, fibreglass-reinforced
plastics, porous concrete
Making cuts near edges, in corners or in difficult-to-reach
areas;
example: Removing joints between wall tiles for improve-
ment work, cutting recesses in tiles, plasterboard or
plastics
Diamond-Riff seg-
ment saw blade
Cement joints, soft wall
tiles, epoxy resin, fibre-
glass-reinforced plastics
Precise routing and cutting of tile/joint material, epoxy
resin and fibreglass-reinforced plastics;
example: Producing small cut-outs in soft wall tiles and
routing recesses in fibreglass-reinforced plastic
TC-Riff Delta plate Mortar, concrete residue,
wood, abrasive materials
Rasping and sanding on a hard surface;
example: Removing mortar or tile adhesive (e.g. when re-
placing damaged tiles), removing carpet adhesive residue
TC-Riff grout and
mortar remover
Mortar, joints, epoxy
resin, fibreglass-rein-
forced plastics, abrasive
materials
Routing and cutting of joint material and tile material, as
well as rasping and sanding on a hard surface;
example: Removing tile adhesive and joint mortar
HCS multi blade Roofing felt, carpets, arti-
ficial turf, cardboard, PVC
flooring
Fast and precise cutting of soft material and flexible abras-
ive materials;
example: Cutting carpets, cardboard, PVC flooring, roof-
ing felt, etc.
Scraper, fixed Carpets, mortar, con-
crete, tile adhesive
Scraping on a hard surface;
example: Removing mortar, tile adhesive, concrete
residue and carpet adhesive residue
Scraper, flexible Carpet adhesive, paint
residue, silicone
Flexible scraping on a soft surface;
example: Removing silicone joints, carpet adhesive
residue and paint residue
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch PMF 350 CES Multitool at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PMF 350 CES Multitool in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info