708263
20
Zoom out
Zoom in
Previous page
1/129
Next page
20 | English
1 609 92A 4K3 | (12.10.2018) Bosch Power Tools
Insert the appropriate segment saw blade for the desired
cutting depth. Slide the depth stop (12) from the tool holder
(8) in the direction of the application tool until you can ro-
tate it freely. Rotate the depth stop (12) so that the desired
cutting depth is above the section of the saw blade that will
be used to saw. Slide the depth stop (12) onto the collar of
the power tool once again as far as it will go.
Remove the depth stop (12) for all other cutting depths and
for working with other application tools. To do this, remove
the application tool and pull the depth stop away from the
collar.
Fitting the Auxiliary Handle (accessory)
The low-vibration auxiliary handle enables the tool to be
used safely and more comfortably.
Screw the auxiliary handle into the thread (5) on the left or
right of the machine head depending on how you are work-
ing.
u Do not continue to use the power tool if the auxiliary
handle is damaged. Do not make any alterations to the
auxiliary handle.
Choosing the Sanding Sheet
Different sanding sheets are available, depending on the material you are working with and the required surface removal rate:
Sanding sheet Material Application Grit
Red quality
All wood and wood-
based materials (e.g.
hardwood, softwood,
chipboard, construction
boards)
Metal materials
For pre-sanding, e.g. of rough and uneven beams and
boards
Coarse 40
60
For surface sanding and levelling of slight irregularities Medium 80
100
120
For finish-sanding and fine sanding of wood Fine 180
240
320
400
White quality
Paint
Varnish
Filler
Bodyfiller
For sanding down paint Coarse 40
60
For sanding undercoats (e.g. removing brushstrokes,
paint drips and paint runs)
Medium 80
100
120
For final sanding of primers prior to painting Fine 180
240
320
Attaching/changing the sanding sheet on the sanding
plate
The sanding plate(10) is fitted with a hook-and-loop fasten-
ing, allowing sanding sheets with a hook-and-loop backing to
be secured quickly and easily.
Tap the hook-and-loop fastening of the sanding plate(10)
before fitting the sanding sheet(11) to facilitate maximum
adhesion.
Position the sanding sheet(11) so that it is flush with one
side of the sanding plate(10), then place the sanding sheet
on the sanding plate and press it on firmly.
To ensure optimum dust extraction, make sure that the
punched holes in the sanding sheet are aligned with the
drilled holes in the sanding plate.
To remove the sanding sheet(11), take hold of it by a corner
and pull it away from the sanding plate(10).
You can use all sanding sheets, polishing and cleaning
fleeces from the Delta 93mm series in Bosch’s range of ac-
cessories.
Sanding accessories such as fleece/polishing felt are at-
tached to the sanding plate in the same way.
Dust/chip extraction
The dust from materials such as lead paint, some types of
wood, minerals and metal can be harmful to human health.
Touching or breathing in this dust can trigger allergic reac-
tions and/or cause respiratory illnesses in the user or in
people in the near vicinity.
Certain dusts, such as oak or beech dust, are classified as
carcinogenic, especially in conjunction with wood treatment
additives (chromate, wood preservative). Materials contain-
ing asbestos may only be machined by specialists.
Use a dust extraction system that is suitable for the ma-
terial wherever possible.
Provide good ventilation at the workplace.
It is advisable to wear a P2 filter class breathing mask.
The regulations on the material being machined that apply in
the country of use must be observed.
u Avoid dust accumulation at the workplace. Dust can
easily ignite.
Connecting the dust extraction system (see figure C)
The dust extraction system (17) is only designed for use
with the sanding plate (10); it serves no purpose when used
together with other application tools.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch PMF 350 CES Multitool at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PMF 350 CES Multitool in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info