708263

Bosch PMF 350 CES Multitool Manual

17
Zoom out
Zoom in
Previous page
1/129
Next page
Noise/Vibration Information
Noise emission values determined according to
EN62841‑2‑4.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 83dB(A); sound power level
94dB(A). Uncertainty K=3dB.
Wear hearing protection
Working without the Auxiliary Handle
Total vibration values a
h
(triax vector sum) and uncertainty K
determined according to EN62841‑2‑4(Sanding),
EN62841‑2‑11(Cutting):
Sanding: a
h
=6 m/s
2
, K=1.5 m/s
2
,
Cutting with plunge cut saw blade: a
h
=10 m/s
2
, K=2 m/s
2
,
Cutting with segmential saw blade: a
h
=10 m/s
2
, K=3 m/s
2
,
Scraping: a
h
=10 m/s
2
, K=1.5 m/s
2
.
Working with the auxiliary handle
Total vibration values a
h
(triax vector sum) and uncertainty K
determined according to EN62841‑2‑4(Sanding),
EN62841‑2‑11(Cutting):
Sanding: a
h
=5 m/s
2
, K=1.5 m/s
2
,
Cutting with plunge cut saw blade: a
h
=13 m/s
2
, K=3 m/s
2
,
Cutting with segmential saw blade: a
h
=12 m/s
2
, K=3 m/s
2
,
Scraping: a
h
=12 m/s
2
, K=1.5 m/s
2
.
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Fitting
u Pull the plug out of the socket before carrying out any
work on the power tool.
Changing the tool
u Wear protective gloves when changing tools. There is
a risk of injury when touching the application tools.
Selecting an Application Tool
Please observe the application tools intended for your power
tool.
Application tool PMF 350 CES
The following table shows examples of application tools. You can find additional application tools in Bosch’s extensive range of
accessories.
Application tool Material Application
Bi-metal segment
saw blade
Wood-based materials,
plastic, non-ferrous
metals
Separating cuts and plunge saw cuts;
including sawing close to edges, in corners and in difficult-
to-reach areas;
example: Shortening skirting boards that are already in-
stalled or door frames, plunge cuts when adapting floor
panels
Sanding plate for
Delta series 93mm
sanding sheets
Depends on the sanding
sheet
Sanding surfaces at edges, in corners or in difficult-to-
reach areas;
depending on the sanding sheet, e.g. for sanding wood,
paint, varnish, stone;
fleeces for cleaning and for texturing wood, removing rust
from metal and for keying varnish, polishing felt for pre-
polishing
Profile sander Wood, pipes/profiles,
paint, varnish, filler, metal
Convenient and efficient sanding of profiles up to a dia-
meter of 55mm;
red sanding sheets for sanding wood, pipes/profiles, var-
nish, filler and metal
English | 17
Bosch Power Tools 1 609 92A 4K3 | (12.10.2018)
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch PMF 350 CES Multitool at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PMF 350 CES Multitool in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info