708263
16
Zoom out
Zoom in
Previous page
1/129
Next page
16 | English
1 609 92A 4K3 | (12.10.2018) Bosch Power Tools
sanding dust is mixed with paint or polyurethane residue
or with other chemical substances and if the workpiece is
hot as a result of prolonged work.
u Keep hands away from the sawing area. Do not reach
under the workpiece. Contact with the saw blade can
lead to injuries.
u Clean the air vents on your power tool regularly. The
motor’s fan will draw the dust inside the housing and ex-
cessive accumulation of powdered metal may cause elec-
trical hazards.
u Use suitable detectors to determine if utility lines are
hidden in the work area or call the local utility com-
pany for assistance. Contact with electric lines can lead
to fire and electric shock. Damaging a gas line can lead to
explosion. Penetrating a water line causes property dam-
age or may cause an electric shock.
u Hold the power tool firmly with both hands and make
sure you have a stable footing. The power tool can be
more securely guided with both hands.
u When changing the application tool, wear protective
gloves.Application tools can become hot when used for
prolonged periods of time.
u Do not scrape any dampened materials (e.g. wallpa-
per) or on damp surfaces. Water entering a power tool
increases the risk of electric shock.
u Do not treat the surface you will be working on with
any fluids that contain solvents. Poisonous vapours
may develop due to the materials heating up when being
scraped.
u Take particular care when handling scrapers and
blades. The application tools are very sharp. Danger of in-
jury.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for sawing and cutting wood-
based materials, plastic, plasterboard, non-ferrous metals
and mounting elements (e.g. nails, clamps). It is also suit-
able for working on soft wall tiles and for dry sanding and
scraping of small areas. It is ideal for working close to edges
and flush with surfaces.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
AutoClic lever for unlocking the application tool/ac-
cessory
(2)
On/off switch
(3)
Ventilation slots
(4)
Orbital stroke rate preselection thumbwheel
(5)
Thread for auxiliary handle
(6)
Auxiliary handle (insulated gripping surface)
(7)
180° light band
(8)
Tool holder
(9)
Plunge cut saw blade
A)
(10)
Sanding plate
A)
(11)
Sanding sheet
A)
(12)
Depth stop
A)
(13)
Segment saw blade
A)
(14)
Handle (insulated gripping surface)
(15)
Dust extraction hose
A)
(16)
Dust extraction outlet
A)
(17)
Dust extraction system
A)
(18)
Clamping lever for dust extraction system
A)
A)
Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Multifunction tool PMF 350 CES
Article number
3603A022..
Orbital stroke rate preselec-
tion
Constant electronic control
Soft start
AutoClic tool holder
Rated power input W 350
Power output W 185
No-load speed n
0
min
−1
15000–20000
Oscillation angle on left/
right
° 1.4
Weight according to
EPTA-Procedure 01:2014
kg 1.6
Protection class / II
The specifications apply to a rated voltage [U] of 230 V. These spe-
cifications may vary at different voltages and in country-specific mod-
els.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch PMF 350 CES Multitool at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PMF 350 CES Multitool in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info