Manual Bosch PMF 10,8 LI (page 23 of 152) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

460547

Zoom out

Zoom in

1/152

English | 23

Bosch Power Tools 2 609 004 157 | (11.5.10)

Selecting the Sanding Sheet

Depending on the material to be worked and the required rate of material removal, different sanding

sheets are available:

Dust/Chip Extraction

f Dusts from materials such as lead-containing

coatings, some wood types, minerals and

metal can be harmful to one’s health. Touch-

ing or breathing-in the dusts can cause aller-

gic reactions and/or lead to respiratory infec-

tions of the user or bystanders.

Certain dusts, such as oak or beech dust, are

considered as carcinogenic, especially in

connection with wood-treatment additives

(chromate, wood preservative). Materials

containing asbestos may only be worked by

specialists.

– Use dust extraction whenever possible.

– Provide for good ventilation of the work-

ing place.

– It is recommended to wear a P2 filter-

class respirator.

Observe the relevant regulations in your

country for the materials to be worked.

Connecting the Dust Extraction (see figure A)

Remove the application tool/accessory when

mounting the dust extraction 18 (accessory).

If required, assemble the parts of the dust extrac-

tion 18 as shown in the figure. Position the as-

sembled dust extraction onto the machine via the

tool holder 7. Turn the dust extraction in such a

manner that the cams of the dust extraction en-

gage into the corresponding recesses on the

housing. Fasten the dust extraction to the ma-

chine with the retaining clip 16 as shown in the

figure.

Pay attention that the felt ring 15 is undamaged

and faces tightly against the sanding plate 12.

Replace a damage felt ring immediately.

Place a vacuum hose 19 (accessory) onto the

vacuum connection 17. Connect the vacuum

hose 19 with a vacuum cleaner (accessory). An

overview for the connection of various vacuum

cleaners can be found at the end of these instruc-

tions.

The vacuum cleaner must be suitable for the ma-

terial being worked.

When vacuuming dry dust that is especially det-

rimental to health or carcinogenic, use a special

vacuum cleaner.

Sanding disc Material Application Grain size

Red quality

– All wooden materi-

als (e.g., hard-

wood, softwood,

chipboard, building

board)

– Metal materials

For coarse-sanding, e.g. of rough, un-

planed beams and boards

coarse 40

For face sanding and planing small

irregularities

medium 80

100

120

For finish and fine sanding of wood fine 180

240

320

400

White quality

–Paint

–Varnish

– Filling compound

– Filler

For sanding off paint coarse 40

For sanding primer (e.g., for removing

brush dashes, drops of paint and paint

run)

medium 80

100

120

For final sanding of primers before coat-

ing

fine 180

240

320

OBJ_BUCH-1170-002.book Page 23 Tuesday, May 11, 2010 3:36 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PMF 10,8 LI in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 10,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch PMF 10,8 LI Manual

Product: