Manual Bosch PMF 10,8 LI (page 22 of 152) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

460547

Zoom out

Zoom in

1/152

22 | English

2 609 004 157 | (11.5.10) Bosch Power Tools

Mounting/Replacing the Application Tool/

Accessory

If required, remove an already mounted applica-

tion tool/accessory.

For removing the application tool/accessory

loosen the screw 10 with the allen key 11 and re-

move the tool.

Mount the application tool/accessory (e.g.

plunge cut saw blade 9) in such a way on the

tool holder 7 that the openings of the tool en-

gage into the cams of the tool holder.

For a safe and fatigue-free working position it is

possible to position the application tools/acces-

sories in any snap-in positions on the tool hold-

er. Position the tool in such a way that the de-

pressed centre points downwards (marking on

the tool is readable from above, see figure on

the graphics page).

Use the screw 10 to fasten the application

tool/accessory. Tightly fasten the screw 10 with

the allen key 11.

f Check the tight seating of the application

tool/accessory. Incorrect or not securely fas-

tened application tools/accessories can come

loose during operation and pose a hazard.

Mounting/Replacing a Sanding Sheet on the

Sanding Plate

The sanding plate 12 is fitted with Velcro back-

ing for quick and easy fastening of sanding

sheets with Velcro adhesion.

Before attaching the sanding sheet 13, free the

Velcro backing of the sanding plate 12 from any

debris by tapping against it in order to enable

optimum adhesion.

Position the sanding sheet 13 flush alongside

one edge of the sanding plate 12, then lay the

sanding sheet onto the sanding plate and press

firmly.

To ensure optimum dust extraction, pay atten-

tion that the punched holes in the sanding sheet

match with the holes in the sanding plate.

To remove the sanding sheet 13, grasp it at one of

the tips and pull it off from the sanding plate 12.

You can use all sanding sheets, fleece pads/

polishing cloth pads of the Delta 93 mm series

of Bosch accessory program.

Sanding accessories, such as fleece pads/pol-

ishing cloth pads, are attached to the sanding

plate in the same manner.

HCS plunge

cut saw

blades, wood

Wooden materials,

soft plastics

Smaller separating and plunge cuts;

Example: Cut-outs in furniture for cable con-

nections

BIM plunge

cut saw

blades, metal

Metal (e.g. unhard-

ened nails, screws,

smaller profiles),

non-ferrous metals

Smaller separating and plunge cuts;

Example: Shortening narrow profiles, cutting

fastening elements such as staples

HM-Riff seg-

ment saw

blade

Grouting joints, soft

wall tiles, glass-fibre

reinforces plastic

and other abrasive

materials

Cutting and separating close to edges, in cor-

ners or hard to reach areas;

Example: Removing grouting joints between

wall tiles for repair work, cutting openings in

tiles, gypsum boards or plastic

HM-Riff delta

plate

Mortar, concrete

remainders, wood,

abrasive materials

Rasping and sanding on hard surfaces;

Example: Removing mortar or tile adhesive

(e.g. when replacing damaged tiles)

Scraper, rigid Carpets, coverings Scraping on hard surfaces;

Example: Removing carpet and tile adhesive

Accessory Material Application

OBJ_BUCH-1170-002.book Page 22 Tuesday, May 11, 2010 3:36 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PMF 10,8 LI in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 10,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch PMF 10,8 LI Manual

Product: