Manual Bosch PCM 7 (page 29 of 346) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

544038

Zoom out

Zoom in

1/346

English | 29

Bosch Power Tools 1 609 929 U75 | (19.7.10)

External Dust Extraction

For dust extraction, a vacuum hose (size

Ø 36 mm) can also be connected to the dust

ejector 21.

The vacuum cleaner must be suitable for the ma-

terial being worked.

When vacuuming dry dust that is especially det-

rimental to health or carcinogenic, use a special

vacuum cleaner.

Changing the Tool (see figures D1– D4)

f Before any work on the machine itself, pull

the mains plug.

f When mounting the saw blade, wear protec-

tive gloves. Danger of injury when touching

the saw blade.

Use only saw blades whose maximum permitted

speed is higher than the no-load speed of the

power tool.

Use only saw blades that correspond with the

characteristic data given in these operation in-

structions and that are tested and marked in ac-

cordance with EN 847-1.

Use only saw blades recommended by the tool

manufacturer, and suitable for sawing the mate-

rials to be cut.

Removing the Saw Blade

– Bring the power tool into the working posi-

tion.

– Turn the Allen screw 30 with the Allen key 22

provided while at the same time pressing the

spindle lock 28 until it engages.

– Hold the spindle lock 28 pressed and un-

screw the Allen screw 30 in clockwise direc-

tion (left-hand thread!).

– Remove the clamping flange 31.

– Press lever 3 and swing back the retracting

blade guard 5 to the stop.

– Hold the retracting blade guard in this posi-

tion and remove the saw blade 17.

– Slowly guide the retracting blade guard

downward again.

Mounting the Saw Blade

If required, clean all parts to be mounted prior

to assembly.

– Press lever 3, swing back the retracting

blade guard 5 to the stop and hold it in this

position.

– Place the new saw blade onto the interior

clamping flange 32.

f When mounting the saw blade, pay atten-

tion that the cutting direction of the teeth

(arrow direction on the saw blade) corre-

sponds with the direction of the arrow on

the blade guard!

– Slowly guide the retracting blade guard

downward again.

– Place on the clamping flange 31 and the

screw 30.

Press the spindle lock 28 until it engages and

tighten the screw turning in anticlockwise di-

rection.

Operation

f Before any work on the machine itself, pull

the mains plug.

Transport Safety (see figure E)

The transport safety-lock 24 enables easier han-

dling of the machine when transporting to vari-

ous working locations.

Releasing the Machine (Working Position)

– Push the tool arm by the handle 1 down a lit-

tle in order to relieve the transport safety-

lock 24.

– Pull the transport safety-lock 24 completely

outward.

– Guide the tool arm slowly upward.

Securing the Machine (Transport Position)

– Tighten clamping lever 25 to lock the saw ta-

ble 11.

– Press lever 3 and at the same time, swing the

tool arm by handle 1 toward the rear until the

transport safety-lock 24 can be pushed com-

pletely inward.

The tool arm is now securely locked for trans-

port.

OBJ_BUCH-880-004.book Page 29 Monday, July 19, 2010 11:56 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PCM 7 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 20,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch PCM 7 Manual

Product: