Manual Bosch PCM 7 (page 28 of 346) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

544038

Zoom out

Zoom in

1/346

28 | English

1 609 929 U75 | (19.7.10) Bosch Power Tools

Assembly

f Avoid unintentional starting of the ma-

chine. During assembly and for all work on

the machine, the power plug must not be

connected to the mains supply.

Delivery Scope

Please also observe the represen-

tation of the delivery scope at the

beginning of the operating instruc-

tions.

Before starting the operation of the machine for

the first time, check if all parts listed below have

been supplied:

– Chop and mitre saw with mounted saw blade

– Dust bag 18

– Material clamp 14

– Allen key 22

– Batteries (2x, size LR03, 1,5 V)

Note: Check the power tool for possible dam-

age.

Before further use of the machine, check that all

protective devices are fully functional. Any light-

ly damaged parts must be carefully checked to

ensure flawless operation of the tool. All parts

must be properly mounted and all conditions

fulfilled that ensure faultless operation.

Damaged protective devices and parts must be

immediately replaced by an authorised service

centre.

Additionally required tools (not in delivery

scope):

– Phillips screwdriver

Mounting to a Working Surface

(see figure A)

f To ensure safe handling, the machine must

be mounted on a level and stable surface

(e. g., workbench) prior to using.

– Carefully remove all parts included in the de-

livery from their packaging.

– Remove all packaging material from the ma-

chine and the accessories provided.

– Fasten the power tool with suitable screw

fasteners to the working surface. The holes

12 serve for this purpose.

Inserting the Batteries (see figure B)

– Open the battery compartment 29.

– Insert the batteries provided according to

the specified polarity.

– Close the battery compartment.

Dust/Chip Extraction

Dusts from materials such as lead-containing

coatings, some wood types, minerals and metal

can be harmful to one’s health. Touching or

breathing-in the dusts can cause allergic reac-

tions and/or lead to respiratory infections of the

user or bystanders.

Certain dusts, such as oak or beech dust, are

considered as carcinogenic, especially in con-

nection with wood-treatment additives (chro-

mate, wood preservative). Materials containing

asbestos may only be worked by specialists.

– Always use dust extraction.

– Provide for good ventilation of the working

place.

– It is recommended to wear a P2 filter-class

respirator.

Observe the relevant regulations in your country

for the materials to be worked.

The dust/chip extraction can be blocked by

dust, chips or workpiece fragments.

– Switch the machine off and pull the mains

plug from the socket outlet.

– Wait until the saw blade has come to a com-

plete stop.

– Determine the cause of the blockage and cor-

rect it.

Integrated Dust Extraction (see figure C)

– Mount the dust bag 18 onto the sawdust

ejector 21.

During sawing, the dust bag must never come in-

to contact with the movable machine parts.

Always empty the dust bag in good time.

OBJ_BUCH-880-004.book Page 28 Monday, July 19, 2010 11:56 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PCM 7 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 20,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch PCM 7 Manual

Product: