Manual Bosch GWS 24-230 JBX (page 20 of 135) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

79055

Zoom out

Zoom in

1/135

English - 6

Auxiliary Handle

■ For all work with the machine, the auxiliary

handle must be mounted.

Screw the auxiliary handle 4 into the head of the

machine according to the working method.

Vibration-dampening Auxiliary Handle

The vibration-dampening auxiliary handle re-

duces the vibrations, making operation more

comfortable and secure.

Do not make any alterations to the aux-

iliary handle.

Do not continue to use an auxiliary handle if it is

damaged.

Hand Guard

For work with the rubber sanding plate 19 or with

the cup brush 22/disc brush/flap disc, the hand

guard 18 (accessory) is to be mounted.

The hand guard 18 is fastened with the auxiliary

handle 4.

■ Before any work on the machine itself, pull the

mains plug.

Grinding and cutting discs become very hot

while working; do not touch until they have

cooled.

It is recommended to use the quick-clamping

nut 11. When using the clamping nut 16 in-

creased effort to loosen the clamping nut must be

taken into account.

Clean the grinder spindle and all parts to be

mounted. For clamping and loosening the grind-

ing tools, lock the grinder spindle 6 with the spin-

dle lock button 2.

Actuate the spindle lock button 2 only when

the grinder spindle is at a standstill!

Quick Clamping Nut

When using the quick-clamping nut 11, grinding

tools can be mounted without additional tools.

Use only a flawless, undamaged quick-clamp-

ing nut 11.

When screwing on, take care that the side

with printing does not point to the grinding

disc. The arrow must point to the index

mark 28.

Lock the grinder

spindle with the spin-

dle lock button 2.

Tighten the quick-

clamping nut by

firmly turning the

grinding disc in clock-

wise direction.

A properly attached,

undamaged quick-

clamping nut can be

loosened by hand

when turning the

knurled ring in anti-

clockwise direction.

Never loosen a tight

quick-clamping nut

with pliers. Always

use the two-pin

spanner. Insert the

two-pin spanner as

shown in the illustra-

tion.

Grinding/Cutting Disc

Pay attention to the dimensions of the grind-

ing disc. The mounting hole diameter must fit

the mounting flange 5 without play. Do not

use reducers or adapters.

When using a diamond cutting disc, take care

that the direction-of-rotation arrow on the dia-

mond cutting disc and the direction of rotation of

the machine (direction-of-rotation arrow on the

machine head) agree.

For mounting, see the illustration page.

Position the grinding/cutting disc onto the mount-

ing flange 5. Ensure that the grinding tool is

seated centred and without play on the mounting

flange.

Screw on the quick-clamping nut 11 and tighten

the grinding disc.

☞

After mounting the grinding tool and be-

fore switching on, check that the grind-

ing tool is correctly mounted and that it

can turn freely.

Mounting the Grinding Tools

1 609 929 H82.book Seite 6 Dienstag, 3. Mai 2005 3:11 15

21 • 1 609 929 H82 • TMS • 28.04.05

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GWS 24-230 JBX in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,27 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch GWS 24-230 JBX Manual

Product: