79055
19
Zoom out
Zoom in
Previous page
1/135
Next page
English - 5
Safety warnings specific for wire brushing
operations
Be aware that wire bristles are thrown by
the brush even during ordinary operation.
Do not overstress the wires by applying ex-
cessive load to the brush. The wire bristles
can easily penetrate light clothing and/or skin.
If the use of a guard is recommended for
wire brushing, do not allow any interfer-
ence of the wire wheel or brush with the
guard. Wire wheel or brush may expand in di-
ameter due to work load and centrifugal
forces.
Additional safety instructions
Use suitable detectors to determine if util-
ity lines are hidden in the work area or call
the local utility company for assistance.
Contact with electric lines can lead to fire and
electric shock. Damaging a gas line can lead
to explosion. Penetrating a water line causes
property damage or may cause an electric
shock.
If the power supply should be discon-
nected, e. g. due to a power outage or pull-
ing the mains plug, release the On/Off
switch and set it to the Off position. This
prevents uncontrolled restarting.
When working stone, use dust extraction.
The vacuum cleaner must be approved for
the extraction of stone dust. Using this
equipment reduces dust-related hazards.
Use a cutting guide when cutting stone.
Without sideward guidance, the cutting disc
can jam and cause kickback.
Before any work on the machine itself, pull the
mains plug.
For work with grinding or cutting discs, the pro-
tection guard 7 must be mounted.
Protection Guard with Locking Screw
The coded projection 13 on the protection
guard 7 ensures that only a guard that fits the
machine type can be mounted.
Loosen the clamping screw 12, if necessary.
Place the protection guard 7 with coded projec-
tion 13 into the coded groove on the spindle col-
lar of the machine head and rotate to the required
position (working position).
The closed side of the protection guard 7
must always point to the operator.
Tighten clamping screw 12.
Always pay attention that the protection
guard 7 is firmly seated on the spindle collar.
Protection Guard with Quick Clamp
Open the clamping lever 9.
Place the protection guard 7 with coded projec-
tion 13 into the coded groove on the spindle col-
lar of the machine head and rotate to the required
position (working position).
The closed side of the protection guard 7
must always point to the operator.
To fasten the protection guard 7, close the
clamping lever 9.
Always pay attention that the protection
guard 7 is firmly seated on the spindle collar.
The tightening tension of the clamping bracket
can be changed by releasing or tightening the ad-
justing screw 8.
Mounting the
Protective Devices
1 609 929 H82.book Seite 5 Dienstag, 3. Mai 2005 3:11 15
20 1 609 929 H82 TMS 28.04.05
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GWS 24-230 JBX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GWS 24-230 JBX in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info