Manual Bosch gws 1400 professional (page 22 of 301) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

391343

Zoom out

Zoom in

1/301

English | 231 609 929 K94 • 20.12.06

Grinding/Cutting Disc

Pay attention to the dimensions of the grinding tools.

The mounting hole diameter must fit the mounting

flange without play. Do not use reducers or adapters.

When using diamond cutting discs, pay attention that

the direction-of-rotation arrow on the diamond cutting

disc and the direction of rotation of the machine (see

direction-of-rotation arrow on the machine head)

agree.

See graphics page for the mounting sequence.

To fasten the grinding/cutting disc, screw on the

clamping nut 9 and tighten with the two-pin spanner;

see Section “Quick-clamping Nut ”.

f After mounting the grinding tool and before

switching on, check that the grinding tool is

correctly mounted and that it can turn freely.

Make sure that the grinding tool does not

graze against the protection guard or other

parts.

An O-ring (plastic part) is inserted

in the mounting flange 7 around the

centring collar. If the O-ring is

missing or is damaged, it must

in all cases be replaced (article

number 1 600 210 039) before

the mounting flange 7 is mounted.

Flap Disc

f For operations with the rubber sanding plate

15 or with the cup brush/wheel brush/flap

disc, always mount the hand guard 14.

Place the special mounting flange (article number

2 605 703 028) and the flap disc on the grinder spin-

dle 5. Screw on the clamping nut 9 and tighten with

the two-pin spanner.

Rubber Sanding Plate

f For operations with the rubber sanding plate

15 or with the cup brush/wheel brush/flap

disc, always mount the hand guard 14.

See graphics page for the mounting sequence.

Screw on the round nut 17 and tighten with the two-

pin spanner.

Cup Brush/Disc Brush

f For operations with the rubber sanding plate

15 or with the cup brush/wheel brush/flap

disc, always mount the hand guard 14.

See graphics page for the mounting sequence.

The cup brush/disc brush must be able to be screwed

onto the grinder spindle until it rests firmly against the

grinder spindle flange at the end of the grinder spindle

threads. Tighten the cup brush/disc brush with an

open-end spanner.

Quick-clamping Nut

For convenient changing of grinding tools without the

use of additional tools, you can use the quick-clamp-

ing nut 10 instead of the clamping nut 9.

f The quick-clamping nut 10 may be used only

for grinding or cutting discs.

Use only a flawless, undamaged quick-clamp-

ing nut 10.

When screwing on, pay attention that the side

of the quick-clamping nut 10 with printing does

not face the grinding disc; the arrow must point

to the index mark 21.

Lock the grinder spindle

with the spindle lock but-

ton 2. To tighten the quick-

clamping nut, firmly turn

the grinding disc in clock-

wise direction.

A properly attached,

undamaged quick-clamp-

ing nut can be loosened

by hand when turning the

knurled ring in anticlock-

wise direction.

Never loosen a tight

quick-clamping nut

with pliers. Always use

the two-pin spanner.

Insert the two-pin spanner

as shown in the illustra-

tion.

OBJ_BUCH-310-001.book Page 23 Wednesday, December 20, 2006 9:31 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch gws 1400 professional in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 14,72 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch gws 1400 professional Manual

Product: