391343
20
Zoom out
Zoom in
Previous page
1/301
Next page
English | 211 609 929 K94 20.12.06
Intended Use
The machine is intended for cutting, roughing, and
brushing metal and stone materials without using
water.
For cutting metal, a special protection guard for cut-
ting (accessory) must be used.
For cutting stone, a special extraction hood for cutting
with cutting guide (accessory) must be used.
With approved sanding tools, the machine can be
used for sanding with sanding discs.
Product Features
The numbering of the product features refers to the
illustration of the machine on the graphics page.
1 Release lever for protection guard
2 Spindle lock button
3 On/Off switch
4 Auxiliary handle
5 Grinder spindle
6 Extraction hood for sanding*
7 Mounting flange with O-ring
8 Carbide grinding head*
9 Clamping nut
10 Quick-clamping nut *
11 Protection guard for sanding
12 Protection guard for cutting*
13 Grinding/cutting disc*
14 Hand guard*
15 Rubber sanding plate*
16 Sanding sheet*
17 Round nut*
18 Cup brush*
19 Cutting guide with dust extraction protection
guard *
20 Diamond cutting disc*
*The accessories illustrated or described are not
included as standard delivery.
Technical Data
Declaration of Conformity
We declare under our sole responsibility that this
product is in conformity with the following standards
or standardization documents: EN 60745 according
to the provisions of the directives 89/336/EEC,
98/37/EC.
04.12.2006, Robert Bosch GmbH, Power Tools Division
D-70145 Leinfelden-Echterdingen
Noise/Vibration Information
Measured values determined according to
EN 60745.
Typically the A-weighted noise level of the machine is:
sound pressure level 91 dB(A); sound power level
102 dB(A). Uncertainty K=3 dB.
Wear hearing protection!
Overall vibrational value (vector sum of three direc-
tions) determined according to EN 60745:
Grinding surfaces (roughing): Vibrational emission
value a
h
=8.5 m/s
2
, uncertainty K=2.0 m/s
2
.
Sanding with sanding discs: Vibrational emission
value a
h
=3.4 m/s
2
, uncertainty K=2.0 m/s
2
.
Angle Grinder GWS 1000
PROFESSIONAL
GWS 1000
PROFESSIONAL
GWS 1400
PROFESSIONAL
Article number 3 601 H21 0.. 3 601 H21 0.. 3 601 H24 0..
Rated power input W 1000 1000 1400
Output power W 630 630 820
No-load speed rpm 11000 11000 11000
Grinding disc diameter, max. mm 115 125 125
Thread of grinder spindle M 14 M 14 M 14
Reduced starting current z
Constant electronic control z
Weight according to
EPTA-Procedure 01/2003
kg 2.1 2.1 2.2
Protection class /II /II /II
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltage and models for specific countries, these
values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary.
Dr. Egbert Schneider
Senior Vice President
Engineering
Dr. Eckerhard Strötgen
Head of Product
Certification
OBJ_BUCH-310-001.book Page 21 Wednesday, December 20, 2006 9:31 AM
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch gws 1400 professional at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch gws 1400 professional in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 14,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info