Manual Bosch gws 1400 professional (page 21 of 301) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

391343

Zoom out

Zoom in

1/301

22 | English 1 609 929 K94 • 20.12.06

The vibration emission level given in

this information sheet has been meas-

ured in accordance with a standard-

ised test given in EN 60745 and may be used to

compare one tool with another.

The vibration emission level will vary because of the ways

in which a power tool can be used and may increase

above the level given in this information sheet. This could

lead to a significant underestimate of exposure when the

tool is used regularly in such a way.

Note: To be accurate, an estimation of the level of expo-

sure to vibration experienced during a given period of

work should also take into account the times when the

tool is switched off and when it is running but not actually

doing the job. This may significantly reduce the exposure

level over the total working period.

Assembly

Mounting the Protective Devices

f Before any work on the machine itself, pull

the mains plug.

Protection Guard for Sanding

Place the protection guard 11

onto the spindle collar as

shown in the illustration. The

triangle marks on the protec-

tion guard must correspond

with the respective marks on

the gear case.

Press the protection guard 11

onto the spindle collar until the

shoulder of the protection

guard is seated against the

flange of the machine, and

turn the protection guard until

it can clearly be heard to

engage.

Adjust the position of the protection guard 11 to the

requirements of the work process. For this, press the

release lever 1 upward and turn the protection guard

11 to the required position.

f Adjust the protection guard 11 in such a

manner that sparking is prevented in the

direction of the operator.

f The protection guard 11 may be turned only

upon actuation of the release lever 1! Other-

wise the power tool may not continue to be

used under any circumstances and must be

taken to an after-sales service agent.

Note: The encoding keys on the protection guard 11

ensure that only a protection guard that fits the

machine type can be mounted.

Protection Guard for Cutting

f For cutting metal, always work with the pro-

tection guard for cutting 12.

f For cutting stone, always work with the cut-

ting guide with dust extraction protection

guard 19.

The protection guard for cutting 12 is mounted in the

same manner as the protection guard for sanding 11.

Extraction Hood for Sanding

The extraction hood 6 can be used for low-dust sand-

ing of paint, varnish and plastics in conjunction with

the carbide grinding head 8 or the rubber sanding

plate 15 with a sanding sheet 16. The extraction hood

6 is not suitable for working metals.

A suitable Bosch vacuum cleaner can be connected

to the extraction hood 6.

The extraction hood 6 is mounted in the same manner

as the protection guard 11. The brush collar is

exchangeable.

Auxiliary Handle

f Operate your machine only with the auxiliary

handle 4.

Screw the auxiliary handle 4 on the right or left of the

machine head depending on the working method.

Hand Guard

f For operations with the rubber sanding plate

15 or with the cup brush/wheel brush/flap

disc, always mount the hand guard 14.

The hand guard 14 is fastened with the auxiliary han-

dle 4.

Mounting the Grinding Tools

f Before any work on the machine itself, pull

the mains plug.

f Grinding and cutting discs become very hot

while working; do not touch until they have

cooled.

Clean the grinder spindle 5 and all parts to be

mounted.

For clamping and loosening the grinding tools, lock

the grinder spindle with the spindle lock button 2.

f Actuate the spindle lock button only when

the grinder spindle is at a standstill. Other-

wise, the machine may become damaged.

WARNING

OBJ_BUCH-310-001.book Page 22 Wednesday, December 20, 2006 9:31 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch gws 1400 professional in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 14,72 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch gws 1400 professional Manual

Product: