786282
23
Zoom out
Zoom in
Previous page
1/315
Next page
English | 23
Maintenance Schedule
Clean the magazine(12). Remove plastic or wood shav-
ings that may accumulate in the magazine during work.
Clean the power tool at regular intervals using com-
pressed air.
Measure Explanation Action
Cleaning the magazine(12) and
magazine slider(13).
Prevents a nail from becoming jammed. Blow out the mechanism of the
magazine/magazine slider daily with
compressed air.
Ensure that the discharge lock-off(2)
functions properly.
Promotes your work safety and efficient
use of the power tool. Blow out the mechanism of the dis-
charge lock-off daily with compressed
air.
Rectifying Faults
Problem Cause Corrective measures
The power tool is not ready for opera-
tion. The battery is discharged or defective. Fully recharge the battery or replace
it.
The battery is not properly inserted. Make sure that the battery is firmly
engaged in the handle.
The battery temperature is too high or
too low. Wait until the battery has reached the
optimal operating temperature again.
The battery contacts are contaminated
or defective. Contact an authorised Bosch after-
sales service centre. Have the com-
ponent replaced there.
The magazine(12) is empty. Refill the magazine.(see "Loading the
magazine (seefiguresA1A4)",
page20)
The discharge lock-off(2) is bent. Contact an authorised Bosch after-
sales service centre. Have the com-
ponent replaced there.
The electronic system is defective. Contact an authorised Bosch after-
sales service centre.
The user interface(9) is defective. Contact an authorised Bosch after-
sales service centre.
The power tool is ready for operation,
but no nails are discharged. The following components may be faulty:
Trigger(5)
Driver blade
Motor or drive belt
Electronics
Contact an authorised Bosch after-
sales service centre. Have the com-
ponent replaced there.
Foreign objects have accumulated in the
shot mechanism. Contact an authorised Bosch after-
sales service centre. Have the com-
ponent replaced there.
Foreign objects have accumulated in the
outlet(15) or in the magazine(12). Clean the outlet(15) or the
magazine(12).
A nail is jammed in the shot duct. Clear the jam.(see "Clearing jams
(seefiguresE1E2)", page22)
The magazine slider(13) is defective. Clean the magazine slider(13) as re-
quired and make sure that the
magazine(12) is not contaminated.
The spring of the magazine slider is too
weak or defective. Contact an authorised Bosch after-
sales service centre. Have the com-
ponent replaced there.
Bosch Power Tools 1 609 92A 81N | (01.08.2022)
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GNH 18V-64 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GNH 18V-64 in the language / languages: All languages as an attachment in your email.

The manual is 6.35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info