786282
24
Zoom out
Zoom in
Previous page
1/315
Next page
24 | English
Problem Cause Corrective measures
The fasteners being used are not ap-
proved. Use only original accessories. Only
the fasteners (nails, staples, etc.)
specified in the "Technical Data" table
may be used.
The magazine(12) is empty. Refill the magazine.(see "Loading the
magazine (seefiguresA1A4)",
page20)
The nails are driven in too deep. The depth stop is set too deep. Adjust the depth stop to the required
depth.(see " Adjusting the depth stop
(seefigureD)", page22)
The buffer is worn. Contact an authorised Bosch after-
sales service centre. Have the com-
ponent replaced there.
The nails are not driven in deep enough. The battery is discharged or defective. Fully recharge the battery or replace
it.
The fasteners are too long. Use only original accessories. Only
the fasteners (nails, staples, etc.)
specified in the "Technical Data" table
may be used.
The depth stop is set too high. Adjust the depth stop to the required
depth.(see " Adjusting the depth stop
(seefigureD)", page22)
The power tool skips nails or has a cycle
feed that is too large. The fasteners being used are not ap-
proved. Use only original accessories. Only
the fasteners (nails, staples, etc.)
specified in the "Technical Data" table
may be used.
The spring of the magazine slider is too
weak or defective. Contact an authorised Bosch after-
sales service centre. Have the com-
ponent replaced there.
Nails are frequently jamming in the shot
duct. The fasteners being used are not ap-
proved. Use only original accessories. Only
the fasteners (nails, staples, etc.)
specified in the "Technical Data" table
may be used.
Contact an authorised Bosch after-
sales service centre.
The driven nails are bent. The driver blade is damaged. Contact an authorised Bosch after-
sales service centre. Have the com-
ponent replaced there.
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
You can find further service addresses at:
www.bosch-pt.com/serviceaddresses
Transport
The recommended lithium-ion batteries are subject to legis-
lation on the transport of dangerous goods. The user can
1 609 92A 81N | (01.08.2022) Bosch Power Tools
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GNH 18V-64 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GNH 18V-64 in the language / languages: All languages as an attachment in your email.

The manual is 6.35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info